EUVIMEDΑνακαλύψτε το EUVIMED
Crossref

Polyacrylonitrile Flower-Like Particles with Tunable Size and Morphology via Scalable Oxygen-Tolerant Polymerization

Kostas Parkatzidis iD, Diego Uruchurtu Patino iD, Yuran Shi iD, Kuang-Jung Hsu iD, Ines Weber, Hyun Suk Wang iD, Zhenan Bao iD

ACS Nano · 2026-02-10 · 20 (5) · 4455-4469

DOI: 10.1021/acsnano.5c19392 ↗

At a glance

Journal article in ACS Nano, published online on 2026-01-26. Written by Kostas Parkatzidis and 6 co-authors. Institution: Department of Chemical Engineering, Stanford University, Stanford, California 94305, United States. Cited 8 times so far (Crossref); 64 references. Funded by: NIH Office of the Director, Schweizerischer Nationalfonds zur F?rderung der Wissenschaftlichen Forschung, Basic Energy Sciences.

ΠερίληψηSubjectsΒιβλιογραφικά στοιχείαCiteRelated studies

Abstract (original language)

Polyacrylonitrile flower-like particles (PANFs), as hierarchical superstructures, have recently found applications in catalysis, batteries, sensing, and gas absorption. Yet, precise control over their size and morphology, which dictate their properties, remains challenging, as the role of reaction parameters in their formation is not well understood. Additionally, the production of PANFs can be challenging due to the current reaction conditions, such as polymerization under inert atmosphere in superheated solvents, especially when a higher scale is required. Here, we address these gaps in two directions. First, we establish how systematic control of key parameters─reaction temperature, initiator type and concentration, and solvent composition─enables predictable tuning of PANF dimensions and surface features. Second, we simplify the reaction by developing a low-temperature, oxygen-tolerant polymerization, which allows the preparation of PANFs without the need for any specialized equipment. As a result, we were able to control the key morphological parameters such as particle diameter, petal density, and petal roughness. By employing different initiators and polymerization temperatures, we were able to produce PANFs with tunable size over an order of magnitude (∼100-1300 nm). Petal density, roughness, and structural complexity were tuned over a wide range by initiator concentration, monomer conversion, solvent mixtures, and oxygen content, which emerged as a key parameter influencing both particle size and morphology. Finally, we establish a one-step, scalable, oxygen-tolerant protocol that enables safe, low-temperature PANF production with near-quantitative yield under ambient conditions. This study provides insights into PANF formation, introduces practical tools for morphological control, and delivers a robust platform for the scalable synthesis of complex polymer architectures.

Subjects

Author keywords

hierarchical superstructureslow-temperature polymerizationoxygen-tolerant polymerizationpolymeric flower-like particlesscalable-synthesis

Authors and institutions

  • Department of Chemical Engineering, Stanford University, Stanford, California 94305, United States.
  • Department of Chemistry, Stanford University, Stanford, California 94305, United States.
  • Department of Materials, ETH Zurich, Zurich 8093, Switzerland.

ORCID profiles: Kostas Parkatzidis, Diego Uruchurtu Patino, Yuran Shi, Kuang-Jung Hsu, Hyun Suk Wang, Zhenan Bao

Funding

  • NIH Office of the Director
  • Schweizerischer Nationalfonds zur F?rderung der Wissenschaftlichen Forschung
  • Basic Energy Sciences
  • Division of Electrical, Communications and Cyber Systems
  • Office of Science
  • Argonne National Laboratory

Cite

APA

Parkatzidis, K., Patino, D. U., Shi, Y., Hsu, K. J., Weber, I., Wang, H. S., & Bao, Z. (2026). Polyacrylonitrile Flower-Like Particles with Tunable Size and Morphology via Scalable Oxygen-Tolerant Polymerization. ACS Nano, 20(5), 4455-4469. https://doi.org/10.1021/acsnano.5c19392

Vancouver

Parkatzidis K, Patino DU, Shi Y, Hsu KJ, Weber I, Wang HS, et al. Polyacrylonitrile Flower-Like Particles with Tunable Size and Morphology via Scalable Oxygen-Tolerant Polymerization. ACS Nano. 2026;20(5):4455-4469. doi:10.1021/acsnano.5c19392

BibTeX
@article{Parkatzidis2026,
  author = {Parkatzidis, Kostas and Patino, Diego Uruchurtu and Shi, Yuran and Hsu, Kuang-Jung and Weber, Ines and Wang, Hyun Suk and Bao, Zhenan},
  title = {Polyacrylonitrile Flower-Like Particles with Tunable Size and Morphology via Scalable Oxygen-Tolerant Polymerization},
  journal = {ACS Nano},
  year = {2026},
  volume = {20},
  number = {5},
  pages = {4455--4469},
  doi = {10.1021/acsnano.5c19392}
}
Start for free →