EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Ultrafast and Resist-Free Nanopatterning of 2D Materials by Femtosecond Laser Irradiation

Alessandro Enrico iD, Oliver Hartwig iD, Nikolas Dominik, Arne Quellmalz iD, Kristinn B Gylfason iD, Georg S Duesberg iD, Frank Niklaus iD, Göran Stemme iD

ACS Nano · 2023-05-09 · 17 (9) · 8041-8052

DOI: 10.1021/acsnano.2c09501 ↗

At a glance

Journal article in ACS Nano, published online on 2023-04-19. Written by Alessandro Enrico and 7 co-authors. Institution: Division of Micro and Nanosystems, KTH Royal Institute of Technology, Malvinas väg 10, 10044 Stockholm, Sweden. Cited 44 times so far (Crossref); 68 references. The full text is freely available (open access, CC BY 4.0). Funded by: Bundesministerium f?r Bildung und Forschung, Vetenskapsr?det, H2020 Future and Emerging Technologies.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

The performance of two-dimensional (2D) materials is promising for electronic, photonic, and sensing devices since they possess large surface-to-volume ratios, high mechanical strength, and broadband light sensitivity. While significant advances have been made in synthesizing and transferring 2D materials onto different substrates, there is still the need for scalable patterning of 2D materials with nanoscale precision. Conventional lithography methods require protective layers such as resist or metals that can contaminate or degrade the 2D materials and deteriorate the final device performance. Current resist-free patterning methods are limited in throughput and typically require custom-made equipment. To address these limitations, we demonstrate the noncontact and resist-free patterning of platinum diselenide (PtSe2), molybdenum disulfide (MoS2), and graphene layers with nanoscale precision at high processing speed while preserving the integrity of the surrounding material. We use a commercial, off-the-shelf two-photon 3D printer to directly write patterns in the 2D materials with features down to 100 nm at a maximum writing speed of 50 mm/s. We successfully remove a continuous film of 2D material from a 200 μm × 200 μm substrate area in less than 3 s. Since two-photon 3D printers are becoming increasingly available in research laboratories and industrial facilities, we expect this method to enable fast prototyping of devices based on 2D materials across various research areas.

Subjects

Author keywords

MoS2PtSe2direct writinggraphenephotoablationtwo-photon patterning

Authors and institutions

  • Division of Micro and Nanosystems, KTH Royal Institute of Technology, Malvinas väg 10, 10044 Stockholm, Sweden.
  • Institute of Physics, EIT 2, Faculty of Electrical Engineering and Information Technology, University of the Bundeswehr Munich & SENS Research Center, Werner-Heisenberg-Weg 39, 85577 Neubiberg, Germany.

ORCID profiles: Alessandro Enrico, Oliver Hartwig, Arne Quellmalz, Kristinn B Gylfason, Georg S Duesberg, Frank Niklaus, Göran Stemme

Funding

  • Bundesministerium f?r Bildung und Forschung
  • Vetenskapsr?det
  • H2020 Future and Emerging Technologies
  • Stiftelsen f?r Strategisk Forskning

Cite

APA

Enrico, A., Hartwig, O., Dominik, N., Quellmalz, A., Gylfason, K. B., Duesberg, G. S., Niklaus, F., & Stemme, G. (2023). Ultrafast and Resist-Free Nanopatterning of 2D Materials by Femtosecond Laser Irradiation. ACS Nano, 17(9), 8041-8052. https://doi.org/10.1021/acsnano.2c09501

Vancouver

Enrico A, Hartwig O, Dominik N, Quellmalz A, Gylfason KB, Duesberg GS, et al. Ultrafast and Resist-Free Nanopatterning of 2D Materials by Femtosecond Laser Irradiation. ACS Nano. 2023;17(9):8041-8052. doi:10.1021/acsnano.2c09501

BibTeX
@article{Enrico2023,
  author = {Enrico, Alessandro and Hartwig, Oliver and Dominik, Nikolas and Quellmalz, Arne and Gylfason, Kristinn B and Duesberg, Georg S and Niklaus, Frank and Stemme, Göran},
  title = {Ultrafast and Resist-Free Nanopatterning of 2D Materials by Femtosecond Laser Irradiation},
  journal = {ACS Nano},
  year = {2023},
  volume = {17},
  number = {9},
  pages = {8041--8052},
  doi = {10.1021/acsnano.2c09501}
}
Start for free →