EUVIMEDEUVIMED entdecken
Crossref

Functionalization and Repurposing of Polypropylene to a Thermoset Polyurethane

Ronard Herrera Monegro iD, Ramanan Krishnamoorti iD, Megan L Robertson iD

ACS Macro Letters · 19.11.2024 · 13 (11) · 1442-1448

DOI: 10.1021/acsmacrolett.4c00505 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Macro Letters, online erschienen am 10.10.2024. Verfasst von Ronard Herrera Monegro und 2 weiteren Autor:innen. Beteiligte Einrichtung: William A. Brookshire Department of Chemical and Biomolecular Engineering, University of Houston, Houston, Texas 77204, United States. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 51 Literaturangaben. Gefördert von: Welch Foundation, Basic Energy Sciences, Division of Materials Research.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Developing effective recycling pathways for polyolefin waste, enabling a move to a circular economy, is an imperative that must be met. Postuse modification has shown promising results in upcycling polyolefins, removing the limitation of inertness, and improving the final physical properties of the recycled material while extending its useful lifetime. Grafting of maleic anhydride groups to polypropylene is an established industrial process that enhances its reactivity and provides a convenient route to further functionalization and upcycling. In this work, maleic anhydride grafted polypropylene was hydroxylated and subsequently cured with a diisocyanate to form a thermoset polyurethane (PU). The crystal structure (unit cell and lamellar structure) of the polypropylene (PP) was preserved in the PU. At room temperature, the PU showed a high modulus due to the crystallization behavior of the PP; upon increasing the temperature above the melting temperature, the modulus decreased to a rubbery plateau, consistent with formation of a network. The resulting PU showed a higher glass transition temperature and lower degree of crystallinity than its PP predecessor due to the crosslinked nature of the polymer. The mechanical integrity of the PU was maintained through several reprocessing cycles due to the melt processability enabled by the presence of a urethane exchange catalyst. This functionalization and upcycling route thus offers a promising alternative to repurposing PP waste in which the creation of melt-processable thermoset polymers expands applications for the materials.

Autor:innen und Institutionen

  • William A. Brookshire Department of Chemical and Biomolecular Engineering, University of Houston, Houston, Texas 77204, United States.
  • Department of Chemistry, University of Houston, Houston, Texas 77204, United States.

ORCID-Profile: Ronard Herrera Monegro, Ramanan Krishnamoorti, Megan L Robertson

Förderung

  • Welch Foundation
  • Basic Energy Sciences
  • Division of Materials Research

Zitieren

APA

Monegro, R. H., Krishnamoorti, R., & Robertson, M. L. (2024). Functionalization and Repurposing of Polypropylene to a Thermoset Polyurethane. ACS Macro Letters, 13(11), 1442-1448. https://doi.org/10.1021/acsmacrolett.4c00505

Vancouver

Monegro RH, Krishnamoorti R, Robertson ML. Functionalization and Repurposing of Polypropylene to a Thermoset Polyurethane. ACS Macro Letters. 2024;13(11):1442-1448. doi:10.1021/acsmacrolett.4c00505

BibTeX
@article{Monegro2024,
  author = {Monegro, Ronard Herrera and Krishnamoorti, Ramanan and Robertson, Megan L},
  title = {Functionalization and Repurposing of Polypropylene to a Thermoset Polyurethane},
  journal = {ACS Macro Letters},
  year = {2024},
  volume = {13},
  number = {11},
  pages = {1442--1448},
  doi = {10.1021/acsmacrolett.4c00505}
}
Kostenlos starten →