EUVIMEDEUVIMED entdecken
Crossref

Design and Characterization of Dual‐Layer Polypropylene–Polyurethane Composite Membranes

Zeynep Karahaliloğlu, Baki Hazer

Polymer Engineering & Science · 2026-11 · 66 (11) · 8387-8399

DOI: 10.1002/pen.70839 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Engineering & Science, online erschienen am 01.09.2026. Verfasst von Zeynep Karahaliloğlu und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 62 Literaturangaben. Gefördert von: Türkiye Bilimsel ve Teknolojik Araştırma Kurumu.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of composite membranes with tunable surface properties and controlled fiber architecture is essential for improving membrane performance in advanced filtration systems. In this study, novel polypropylene–polyurethane (PP–PU) composite fiber membranes were fabricated and characterized using a two‐step fabrication strategy. The microfibrous PP bottom layer was modified with β‐zeolite, while the nanofibrous top layer was formed by electrospinning PU–oleic acid (OLE)–polyethylene glycol (PEG) copolymers with varying PEG content. The synthesized copolymers were characterized by Fourier transform infrared spectroscopy (FTIR) and proton nuclear magnetic resonance ( 1 H NMR), while membrane morphology, wettability, and elemental composition were evaluated using scanning electron microscopy (SEM), contact angle measurements, and energy‐dispersive X‐ray spectroscopy (EDS). The electrospun membranes exhibited average fiber diameters of 0.307 ± 0.07, 0.309 ± 0.07, and 0.460 ± 0.10 μm for PEG1, PEG2, and PEG3, respectively. Morphological analyses confirmed uniform fiber structures and increased surface roughness with higher PEG ratios. The incorporation of β‐zeolite significantly enhanced the hydrophilicity of the membranes, reducing the water contact angle from 131.21° ± 2.4° to 115.33° ± 1.7°. Among the formulations, PU–OLE–PEG2 showed optimal performance, providing a balance between uniform morphology, controlled fiber diameter, and enhanced hydrophilicity. These findings demonstrate that the combined incorporation of PEG and β‐zeolite effectively tailors the structural and surface characteristics of dual‐layer PP–PU composite membranes, providing a promising platform for future membrane filtration applications.

Förderung

  • Türkiye Bilimsel ve Teknolojik Araştırma Kurumu

Zitieren

APA

Karahaliloğlu, Z., & Hazer, B. (2026). Design and Characterization of Dual‐Layer Polypropylene–Polyurethane Composite Membranes. Polymer Engineering & Science, 66(11), 8387-8399. https://doi.org/10.1002/pen.70839

Vancouver

Karahaliloğlu Z, Hazer B. Design and Characterization of Dual‐Layer Polypropylene–Polyurethane Composite Membranes. Polymer Engineering & Science. 2026;66(11):8387-8399. doi:10.1002/pen.70839

BibTeX
@article{Karahalilolu2026,
  author = {Karahaliloğlu, Zeynep and Hazer, Baki},
  title = {Design and Characterization of Dual‐Layer Polypropylene–Polyurethane Composite Membranes},
  journal = {Polymer Engineering & Science},
  year = {2026},
  volume = {66},
  number = {11},
  pages = {8387--8399},
  doi = {10.1002/pen.70839}
}
Kostenlos starten →