EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimized Graphene-Oxide-Based Interconnecting Layer in All-Perovskite Tandem Solar Cells

Melissa R Fitzsimmons, Bart Roose iD, Yutong Han, Taeheon Kang, Yu-Hsien Chiang, Chieh-Szu Huang, Yang Lu, Terry Chien-Jen Yang iD, Cullen Chosy, Shaoliang Guan, Miguel Anaya iD, Samuel D Stranks iD

ACS Energy Letters · 14.02.2025 · 10 (2) · 713-725

DOI: 10.1021/acsenergylett.4c03065 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Energy Letters, online erschienen am 09.01.2025. Verfasst von Melissa R Fitzsimmons und 11 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering and Biotechnology, University of Cambridge, Cambridge CB3 0AS, United Kingdom. Die Arbeit wurde bisher 39-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council, Royal Society, H2020 European Research Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

All-perovskite tandem solar cells represent a significant advancement in next-generation photovoltaics toward higher power conversion efficiencies than single junction cells. A critical component of a monolithic tandem solar cell is the interconnecting layer, which facilitates the integration of the wide bandgap and low bandgap subcells. Conventional designs in all-perovskite tandem cells are based on an ultrathin metal recombination layer, typically Au, alongside a poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS) hole transporting layer, which introduce optical and recombination losses, and instabilities. Here, we present a new interconnecting layer based on a graphene-oxide recombination layer, which facilitates the replacement of PEDOT:PSS with the preferred self-assembled monolayer [2-(9H-carbazol-9-yl)ethyl]phosphonic acid (2PACz). This device architecture results in significantly reduced optical and nonradiative losses, leading to champion device efficiency of 23.4% compared to 19.7% with the conventional layers, along with improvements in stability. This work solves a critical challenge in all-perovskite tandem cell device design.

Autor:innen und Institutionen

  • Department of Chemical Engineering and Biotechnology, University of Cambridge, Cambridge CB3 0AS, United Kingdom.
  • Department of Physics, Cavendish Laboratory, University of Cambridge, Cambridge CB3 0HE, United Kingdom.

ORCID-Profile: Bart Roose, Terry Chien-Jen Yang, Miguel Anaya, Samuel D Stranks

Förderung

  • Engineering and Physical Sciences Research Council
  • Royal Society
  • H2020 European Research Council

Zitieren

APA

Fitzsimmons, M. R., Roose, B., Han, Y., Kang, T., Chiang, Y. H., Huang, C. S., Lu, Y., Yang, T. C., Chosy, C., Guan, S., Anaya, M., & Stranks, S. D. (2025). Optimized Graphene-Oxide-Based Interconnecting Layer in All-Perovskite Tandem Solar Cells. ACS Energy Letters, 10(2), 713-725. https://doi.org/10.1021/acsenergylett.4c03065

Vancouver

Fitzsimmons MR, Roose B, Han Y, Kang T, Chiang YH, Huang CS, et al. Optimized Graphene-Oxide-Based Interconnecting Layer in All-Perovskite Tandem Solar Cells. ACS Energy Letters. 2025;10(2):713-725. doi:10.1021/acsenergylett.4c03065

BibTeX
@article{Fitzsimmons2025,
  author = {Fitzsimmons, Melissa R and Roose, Bart and Han, Yutong and Kang, Taeheon and Chiang, Yu-Hsien and Huang, Chieh-Szu and Lu, Yang and Yang, Terry Chien-Jen and Chosy, Cullen and Guan, Shaoliang and Anaya, Miguel and Stranks, Samuel D},
  title = {Optimized Graphene-Oxide-Based Interconnecting Layer in All-Perovskite Tandem Solar Cells},
  journal = {ACS Energy Letters},
  year = {2025},
  volume = {10},
  number = {2},
  pages = {713--725},
  doi = {10.1021/acsenergylett.4c03065}
}
Kostenlos starten →