High‐Efficiency Perovskite‐Organic Tandem Solar Cells Enabled by Perovskite Crystallization Optimization and Metal‐Free Interconnecting Layer
Advanced Materials · 13.11.2026
DOI: 10.1002/adma.75735 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 13.11.2026. Verfasst von Longfei Liu und 8 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Polymer Optoelectronic Materials and Devices, State Key Laboratory of Luminescent Materials and Devices, School of Materials Science and…. Die Arbeit nennt 52 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Fundamental and Interdisciplinary Disciplines Breakthrough Plan of the Ministry of Education of China, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
Perovskite‐organic tandem solar cells (PO‐TSCs) offer a promising route toward high‐efficiency and cost‐effective photovoltaics by combining wide‐bandgap (WBG) perovskite solar cells (PSCs) with narrow‐bandgap organic solar cells. Nevertheless, achieving high‐performance PO‐TSCs still faces key challenges: open‐circuit voltage ( V OC ) loss in the WBG perovskite sub‐cell and optoelectrical loss at the interconnecting layer (ICL). Here, we incorporate 4‐nitrophenethylamine hydrochloride (4N‐PEACl), a functional additive bearing a strong electron‐withdrawing group (‐NO 2 ), into the WBG perovskite precursor solution to modulate crystallization kinetics and passivate bulk defects. This additive significantly improves crystallinity and phase stability, suppresses non‐radiative recombination and enhances charge extraction and transport. Consequently, the optimized 1.85 eV WBG single‐junction PSC achieves a champion efficiency of 19.79%, with V OC increasing from 1.349 to 1.388 V. Furthermore, the optimal PO‐TSC achieves an efficiency of 27.10% with an ICL of PCBM/AZO/SnO 2 /PEDOT:PSS/Ph‐4PACz. This work highlights the efficacy of ‐NO 2 ‐functionalized molecules in improving WBG perovskite film quality and provides new design strategy for low‐cost but effective ICLs in PO‐TSCs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Polymer Optoelectronic Materials and Devices, State Key Laboratory of Luminescent Materials and Devices, School of Materials Science and Engineering, South China University of Technology, Guangzhou, P.R. Ch…
- Guangdong Basic Research Center of Excellence for Energy and Information Polymer Materials, Guangzhou, P.R. China.
ORCID-Profile: Longfei Liu, Kai Zhang, Fei Huang
Förderung
- National Natural Science Foundation of China
- Fundamental and Interdisciplinary Disciplines Breakthrough Plan of the Ministry of Education of China
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Liu, L., Feng, C., Liu, S., Xu, Y., Wang, Z., Li, J., Zhang, Y., Zhang, K., & Huang, F. (2026). High‐Efficiency Perovskite‐Organic Tandem Solar Cells Enabled by Perovskite Crystallization Optimization and Metal‐Free Interconnecting Layer. Advanced Materials. https://doi.org/10.1002/adma.75735
Vancouver
Liu L, Feng C, Liu S, Xu Y, Wang Z, Li J, et al. High‐Efficiency Perovskite‐Organic Tandem Solar Cells Enabled by Perovskite Crystallization Optimization and Metal‐Free Interconnecting Layer. Advanced Materials. 2026. doi:10.1002/adma.75735
BibTeX
@article{Liu2026,
author = {Liu, Longfei and Feng, Chuizheng and Liu, Songtao and Xu, Yao and Wang, Zihao and Li, Jianing and Zhang, Yi and Zhang, Kai and Huang, Fei},
title = {High‐Efficiency Perovskite‐Organic Tandem Solar Cells Enabled by Perovskite Crystallization Optimization and Metal‐Free Interconnecting Layer},
journal = {Advanced Materials},
year = {2026},
doi = {10.1002/adma.75735}
}
EUVIMED