EUVIMEDObjevte EUVIMED
Open access · CC BY 4.0

Controlling Oxide-to-Carbide Transformation Enables Highly Active and Carbon-Efficient Fe-Carbide Fischer-Tropsch Catalysts from Flame Spray Pyrolysis

Yonghui Fan, Robert Pestman, Iulian Dugulan, Yu Gao, Jason M. J. J. Heinrichs, Peng Wang, Emiel J. M. Hensen

ACS Catalysis · 2026-09-04 · 16 (17) · 17326-17338

DOI: 10.1021/acscatal.6c04576 ↗

At a glance

Journal article in ACS Catalysis, published online on 2026-08-18. Written by Yonghui Fan and 6 co-authors. Cited 2 times so far (Crossref); 54 references. The full text is freely available (open access, CC BY 4.0). Funded by: European Synchrotron Radiation Facility, China Scholarship Council, National Natural Science Foundation of China.

AbstraktBibliografické údajeCiteRelated studies

Abstract (original language)

Achieving high activity while suppressing undesired methane and CO2 formation remains a central challenge in Fischer–Tropsch (FT) synthesis over iron catalysts. Here, we demonstrate that precise control over the oxide-to-carbide transformation enables highly active and carbon-efficient FT catalysts. A well-defined γ-Fe2O3 precursor synthesized by flame spray pyrolysis (FSP) provides uniform, nanosized particles that facilitate low-temperature carburization. Complete conversion to iron carbide is achieved at 275 °C under mild conditions, while minimizing residual oxides, particle sintering, and excessive carbon deposition. By combining in situ wide-angle X-ray scattering (WAXS), quasi-in situ X-ray photoelectron spectroscopy (XPS), and Mössbauer spectroscopy, we elucidate the phase evolution and surface dynamics during carburization. Rapid formation of χ-Fe5C2 is observed without detectable accumulation of metallic Fe, whereas prolonged treatment primarily results in surface carbon buildup rather than further carbide formation. The optimized catalyst exhibits high CO conversion with a combined CH4 and CO2 selectivity below 20%, demonstrating a promising balance between catalytic activity and product selectivity. Comparative studies reveal that the superior performance originates from enhanced carbide phase purity, suppressed carbon deposition, and improved dispersion. These findings highlight precursor engineering coupled with mild carburization as a general strategy for designing efficient iron-based FT catalysts.

Funding

  • European Synchrotron Radiation Facility
  • China Scholarship Council
  • National Natural Science Foundation of China
  • CHN Energy Science and Technology Innovation Project

Cite

APA

Fan, Y., Pestman, R., Dugulan, I., Gao, Y., Heinrichs, J. M. J. J., Wang, P., & Hensen, E. J. M. (2026). Controlling Oxide-to-Carbide Transformation Enables Highly Active and Carbon-Efficient Fe-Carbide Fischer-Tropsch Catalysts from Flame Spray Pyrolysis. ACS Catalysis, 16(17), 17326-17338. https://doi.org/10.1021/acscatal.6c04576

Vancouver

Fan Y, Pestman R, Dugulan I, Gao Y, Heinrichs JMJJ, Wang P, et al. Controlling Oxide-to-Carbide Transformation Enables Highly Active and Carbon-Efficient Fe-Carbide Fischer-Tropsch Catalysts from Flame Spray Pyrolysis. ACS Catalysis. 2026;16(17):17326-17338. doi:10.1021/acscatal.6c04576

BibTeX
@article{Fan2026,
  author = {Fan, Yonghui and Pestman, Robert and Dugulan, Iulian and Gao, Yu and Heinrichs, Jason M. J. J. and Wang, Peng and Hensen, Emiel J. M.},
  title = {Controlling Oxide-to-Carbide Transformation Enables Highly Active and Carbon-Efficient Fe-Carbide Fischer-Tropsch Catalysts from Flame Spray Pyrolysis},
  journal = {ACS Catalysis},
  year = {2026},
  volume = {16},
  number = {17},
  pages = {17326--17338},
  doi = {10.1021/acscatal.6c04576}
}
Start for free →