PdCu Electrocatalysts for Selective Nitrate and Nitrite Reduction to Nitrogen
ACS Catalysis · 2023-01-06 · 13 (1) · 87-98
DOI: 10.1021/acscatal.2c04841 ↗At a glance
Journal article in ACS Catalysis, published online on 2022-12-12. Written by Jeonghoon Lim and 5 co-authors. Cited 109 times so far (Crossref); 75 references. Funded by: Gordon and Betty Moore Foundation, Division of Engineering Education and Centers, Division of Chemical, Bioengineering, Environmental, and Transport Systems.
Abstract (original language)
: Electrocatalytic conversion of nitrate in waste can enable efficient waste remediation (NO 3 − to N 2 ) or waste valorization (NO 3 − to NH 4+ ) depending on the selectivity of the catalyst. Palladium and copper electrocatalysts typically exhibit ideal nitrate and nitrite binding properties, allowing for effective destruction of nitrate. However, rational steering of selectivity through material design remains a critical challenge for PdCu electrocatalyst. Here, we use the electrochemical underpotential deposition method to synthesize palladium nanocube electro-cataysts with controlled copper surface coverage (e.g., partial and full copper coatings). We then examine the potential for NO 3 − destruction (conversion) and NO 2 − reduction reaction. We identify that partial copper-coated Pd nanocubes not only effectively facilitate the reduction of 95% of NO 3 − but also increase the reduction of NO 2 − to N 2 with 89% selectivity over 20 consecutive cycles (80 h). We also show that under these conditions, the Pd(100) surface facet is exposed. Complete copper-covered Pd nanocubes effectively facilitate the reduction of ∼ 99% of NO 3 − . Complete coverage of copper; however, prevented exposure of Pd(100) surface facet, promoting the selective reduction of NO 2 − to NH 4+ with a 70% selectivity over 20 consecutive cycles (80 h). Density functional theory (DFT) calculations show that NO 3 − and NO 2 − adsorb more strongly on the Cu(100) surface compared to the Pd(100) surface, while the NO * intermediate generated from NO 3 − or NO 2 − reduction adsorbs more strongly on the Pd surface. Barrier calculations show that NO * can readily migrate from the Cu domain to the Pd domain and that the N − N coupling barrier on Pd is significantly diminished at high NO * coverage. Together, these results suggest that the high N 2 selectivity observed on the PdCu electrocatalyst is caused by the spillover of NO * from the Cu domains to the Pd domains.
Funding
- Gordon and Betty Moore Foundation
- Division of Engineering Education and Centers
- Division of Chemical, Bioengineering, Environmental, and Transport Systems
Cite
APA
Lim, J., Chen, Y., Cullen, D. A., Lee, S. W., Senftle, T. P., & Hatzell, M. C. (2023). PdCu Electrocatalysts for Selective Nitrate and Nitrite Reduction to Nitrogen. ACS Catalysis, 13(1), 87-98. https://doi.org/10.1021/acscatal.2c04841
Vancouver
Lim J, Chen Y, Cullen DA, Lee SW, Senftle TP, Hatzell MC. PdCu Electrocatalysts for Selective Nitrate and Nitrite Reduction to Nitrogen. ACS Catalysis. 2023;13(1):87-98. doi:10.1021/acscatal.2c04841
BibTeX
@article{Lim2023,
author = {Lim, Jeonghoon and Chen, Yu and Cullen, David A. and Lee, Seung Woo and Senftle, Thomas P. and Hatzell, Marta C.},
title = {PdCu Electrocatalysts for Selective Nitrate and Nitrite Reduction to Nitrogen},
journal = {ACS Catalysis},
year = {2023},
volume = {13},
number = {1},
pages = {87--98},
doi = {10.1021/acscatal.2c04841}
}
EUVIMED