Fabrication of Multiscale Porous Hydrogel Scaffold for Air–Liquid Interface Culture of Epithelial Cells Using Nebulized CaCl2-Assisted Three-Step Cross-Linking Three-Dimensional Printing
ACS Biomaterials Science & Engineering · 12.11.2026
DOI: 10.1021/acsbiomaterials.6c01032 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Biomaterials Science & Engineering, online erschienen am 12.11.2026. Verfasst von Kyle R Phillips und 13 weiteren Autor:innen. Beteiligte Einrichtung: J. Crayton Pruitt Family Department of Biomedical Engineering, University of Florida, Gainesville, Florida32611, United States. Die Arbeit nennt 52 Literaturangaben. Gefördert von: National Science Foundation, NIH HHS, USC Norris Comprehensive Cancer Center.
Abstract (Originalsprache)
Creating thick tissue constructs that can enable air–liquid interface (ALI) culture is of great interest for the culture of epithelial cells. This paper presents a method of using nebulized calcium chloride (CaCl2)-assisted three-dimensional printing with a sacrificial polyvinyl alcohol (PVA) porogen component for the fabrication of a thick, multiscale porous scaffold for ALI cell culture. The ink used for scaffold fabrication is composed of gelatin microgels, PVA, sodium alginate, and a continuous gelatin solution. This fabrication approach utilizes ionic in situ cross-linking of sodium alginate using nebulized CaCl2, in addition to gelatin microgel jamming-based physical cross-linking during printing and enzymatic cross-linking of gelatin-based scaffolds post-printing, to create a robust structure, incorporating three different cross-linking steps. Exposure to the nebulized CaCl2 increases the storage modulus of the gel from 150 Pa to over 700 Pa and increases printing fidelity significantly. After cross-linking, the PVA component is leached from the scaffold, creating a network of pores to enhance transport. Printed scaffolds are able to transport 10 kDa molecules, roughly analogous to standard protein sizes. For applications in cell culture, the printing approach described here is used to fabricate a thick cylindrical scaffold with multiscale porosity, with printed macropores present in all but the solid top layer and micropores throughout the entire scaffold. Cells cultured on such porous scaffolds maintain a high degree of confluence, with an 88.1% surface coverage, while being exposed to air for multiple days. To demonstrate potential use of this approach to create drug screening platforms, cells grown on the scaffolds are exposed to the cancer drug Ulixertinib, delivered via scaffold transport. These results demonstrate that the presented fabrication method can be used to make porous scaffolds for the creation of an ALI culture environment, an important step towards biomimetic ALI models for biomedical applications, including therapeutic screening.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- J. Crayton Pruitt Family Department of Biomedical Engineering, University of Florida, Gainesville, Florida32611, United States.
- Department of Mechanical and Aerospace Engineering, University of Florida, Gainesville, Florida32611, United States.
- Department of Materials Science and Engineering, University of Florida, Gainesville, Florida32611, United States.
- Institute of Public Health, College of Pharmacy and Pharmaceutical Sciences, Florida A&M University, Tallahassee, Florida32307, United States.
- Departments of Surgery and of Cancer Biology, Norris Comprehensive Cancer Center, Keck School of Medicine, University of Southern California, Los Angeles, California90033, United States.
- Department of Molecular Genetics and Microbiology, University of Florida, Gainesville, Florida32611, United States.
ORCID-Profile: Kyle R Phillips, Yong Huang
Förderung
- National Science Foundation
- NIH HHS
- USC Norris Comprehensive Cancer Center
- National Institutes of Health
Zitieren
APA
Phillips, K. R., Wang, R., Ryder, B. J., Ofosu-Asante, K., Gladstone, M. A., Lugo, S., Bo, B. D., Akin-Olugbemi, O., Offringa, I. A., Lamango, N. S., Wu, L., Murfee, W. L., Chen, X., & Huang, Y. (2026). Fabrication of Multiscale Porous Hydrogel Scaffold for Air–Liquid Interface Culture of Epithelial Cells Using Nebulized CaCl2-Assisted Three-Step Cross-Linking Three-Dimensional Printing. ACS Biomaterials Science & Engineering. https://doi.org/10.1021/acsbiomaterials.6c01032
Vancouver
Phillips KR, Wang R, Ryder BJ, Ofosu-Asante K, Gladstone MA, Lugo S, et al. Fabrication of Multiscale Porous Hydrogel Scaffold for Air–Liquid Interface Culture of Epithelial Cells Using Nebulized CaCl2-Assisted Three-Step Cross-Linking Three-Dimensional Printing. ACS Biomaterials Science & Engineering. 2026. doi:10.1021/acsbiomaterials.6c01032
BibTeX
@article{Phillips2026,
author = {Phillips, Kyle R and Wang, Renjing and Ryder, Benjamin J and Ofosu-Asante, Kweku and Gladstone, Matthew A and Lugo, Sofia and Bo, Bianca Dal and Akin-Olugbemi, Oluwateniola and Offringa, Ite A and Lamango, Nazarius S and Wu, Lizi and Murfee, Walter Lee and Chen, Xiongbiao and Huang, Yong},
title = {Fabrication of Multiscale Porous Hydrogel Scaffold for Air–Liquid Interface Culture of Epithelial Cells Using Nebulized CaCl2-Assisted Three-Step Cross-Linking Three-Dimensional Printing},
journal = {ACS Biomaterials Science & Engineering},
year = {2026},
doi = {10.1021/acsbiomaterials.6c01032}
}
EUVIMED