Three-Dimensional Printing Methods for Bioceramic-Based Scaffold Fabrication for Craniomaxillofacial Bone Tissue Engineering
Journal of Functional Biomaterials · 01.03.2024 · 15 (3) · 60
DOI: 10.3390/jfb15030060 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 01.03.2024. Verfasst von Zeeshan Sheikh und 14 weiteren Autor:innen. Beteiligte Einrichtung: Department of Applied Oral Sciences, Faculty of Dentistry, Dalhousie University, 5981 University Avenue, Halifax, NS B3H 1W2, Canada. Die Arbeit wurde bisher 33-mal zitiert (Crossref) und nennt 254 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Three-dimensional printing (3DP) technology has revolutionized the field of the use of bioceramics for maxillofacial and periodontal applications, offering unprecedented control over the shape, size, and structure of bioceramic implants. In addition, bioceramics have become attractive materials for these applications due to their biocompatibility, biostability, and favorable mechanical properties. However, despite their advantages, bioceramic implants are still associated with inferior biological performance issues after implantation, such as slow osseointegration, inadequate tissue response, and an increased risk of implant failure. To address these challenges, researchers have been developing strategies to improve the biological performance of 3D-printed bioceramic implants. The purpose of this review is to provide an overview of 3DP techniques and strategies for bioceramic materials designed for bone regeneration. The review also addresses the use and incorporation of active biomolecules in 3D-printed bioceramic constructs to stimulate bone regeneration. By controlling the surface roughness and chemical composition of the implant, the construct can be tailored to promote osseointegration and reduce the risk of adverse tissue reactions. Additionally, growth factors, such as bone morphogenic proteins (rhBMP-2) and pharmacologic agent (dipyridamole), can be incorporated to promote the growth of new bone tissue. Incorporating porosity into bioceramic constructs can improve bone tissue formation and the overall biological response of the implant. As such, employing surface modification, combining with other materials, and incorporating the 3DP workflow can lead to better patient healing outcomes.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Applied Oral Sciences, Faculty of Dentistry, Dalhousie University, 5981 University Avenue, Halifax, NS B3H 1W2, Canada.
- Department of Dental Clinical Sciences, Faculty of Dentistry, Dalhousie University, 5981 University Avenue, Halifax, NS B3H 1W2, Canada.
- Biomedical Engineering, Faculty of Medicine, Dalhousie University, Dental Building, 5981 University Avenue, Halifax, NS B3H 3J5, Canada.
- Department of Biochemistry and Molecular Biology, Miller School of Medicine, University of Miami, Miami, FL 33136, USA.
- School of Dentistry, International Medical University, Jln Jalil Perkasa 19, Bukit Jalil, Kuala Lumpur 57000, Malaysia.
- Faculty of Health Sciences, Schulich School of Medicine and Dentistry, University of Western Ontario, 1151 Richmond St., London, ON N6A 5C1, Canada.
ORCID-Profile: Zeeshan Sheikh, Abbas Canteenwala, Pierre-Luc Michaud, Michael Glogauer, Lukasz Witek
Zitieren
APA
Sheikh, Z., Nayak, V. V., Daood, U., Kaur, A., Moussa, H., Canteenwala, A., Michaud, P. L., de Fátima Balderrama, Í., de Oliveira Sousa, E., Tovar, N., Torroni, A., Glogauer, M., Talib, H., Coelho, P. G., & Witek, L. (2024). Three-Dimensional Printing Methods for Bioceramic-Based Scaffold Fabrication for Craniomaxillofacial Bone Tissue Engineering. Journal of Functional Biomaterials, 15(3), 60. https://doi.org/10.3390/jfb15030060
Vancouver
Sheikh Z, Nayak VV, Daood U, Kaur A, Moussa H, Canteenwala A, et al. Three-Dimensional Printing Methods for Bioceramic-Based Scaffold Fabrication for Craniomaxillofacial Bone Tissue Engineering. Journal of Functional Biomaterials. 2024;15(3):60. doi:10.3390/jfb15030060
BibTeX
@article{Sheikh2024,
author = {Sheikh, Zeeshan and Nayak, Vasudev Vivekanand and Daood, Umer and Kaur, Anupreet and Moussa, Hanan and Canteenwala, Abbas and Michaud, Pierre-Luc and de Fátima Balderrama, Ísis and de Oliveira Sousa, Edisa and Tovar, Nick and Torroni, Andrea and Glogauer, Michael and Talib, Huzefa and Coelho, Paulo G and Witek, Lukasz},
title = {Three-Dimensional Printing Methods for Bioceramic-Based Scaffold Fabrication for Craniomaxillofacial Bone Tissue Engineering},
journal = {Journal of Functional Biomaterials},
year = {2024},
volume = {15},
number = {3},
pages = {60},
doi = {10.3390/jfb15030060}
}
EUVIMED