EUVIMEDEUVIMED entdecken
Crossref

Model Design and Path Optimization of Perfusable Chips in Extrusion-Based Bioprinting: Linking Hydrogel Rheology with Structural Features

Jiahao Wu iD, Zhitong Li, Weilin Meng, Haobin Zheng iD, Fan Jiang, Mingjun Chen, Chunya Wu iD

ACS Biomaterials Science & Engineering · 2026

DOI: 10.1021/acsbiomaterials.5c01878 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Biomaterials Science & Engineering, 2026. Verfasst von Jiahao Wu und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Robotics and System, Harbin Institute of Technology, Harbin, Heilongjiang 150080, China. Hauptthemen laut MEDLINE: Bioprinting, Hydrogels. Die Arbeit nennt 83 Literaturangaben. Gefördert von: Natural Science Foundation of Chongqing Municipality, China Postdoctoral Science Foundation, Harbin Institute of Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Extrusion-based bioprinting enables precise spatial control over bioink deposition and offers the advantages of cost-effectiveness, versatility, and biocompatibility. While extensive research has focused on assessing bioink printability and developing printing techniques, limited attention has been directed toward the interplay among material properties, structural design, and process optimization. In this study, the relationships among the rheological behavior of the hydrogel, structural characteristics of models, and planning strategies of the path were systematically investigated. The printability of low- and high-viscosity hydrogels was evaluated through the fabrication of pattern arrays and three-dimensional (3D) grid constructs. Results indicated that low-viscosity hydrogels were more suitable for patterns involving frequent extrusion state transitions, whereas high-viscosity hydrogels facilitated steady-state, long-duration printing of three-dimensional scaffolds. To further explore structure-specific path planning, a perfusable chip comprising flat, support, wall, and overhanging features was designed and printed. To address the inherent limitations of conventional 3-axis bioprinting in fabricating large-scale unsupported overhangs, the printing path was optimized according to the rheological properties of hydrogels. Using this strategy, a 10 × 10 mm2 overhanging structure was successfully fabricated, and perfusable hydrogel chips with tunable fluid flow were produced. The chips exhibited reliable flow performance and sealing capacity with a maximum burst pressure of 1.2 kPa. Collectively, this work presents a design framework that integrates material properties with structural features to optimize path planning and printing processes, offering valuable insights for the construction of advanced 3D cell culture systems via extrusion-based bioprinting.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

BioprintingHydrogelsRheologyPrinting, Three-DimensionalViscosityTissue ScaffoldsTissue Engineering

Stichwörter der Autor:innen

extrusion-based bioprintingoverhanging structurepath planningperfusable chiprheological behavior

Substanzen

Hydrogels

Autor:innen und Institutionen

  • State Key Laboratory of Robotics and System, Harbin Institute of Technology, Harbin, Heilongjiang 150080, China.
  • School of Mechatronics Engineering, Harbin Institute of Technology, Harbin, Heilongjiang 150001, China.
  • Key Laboratory of Micro-systems and Micro-structures Manufacturing, Harbin Institute of Technology, Harbin, Heilongjiang 150080, China.

ORCID-Profile: Jiahao Wu, Haobin Zheng, Chunya Wu

Förderung

  • Natural Science Foundation of Chongqing Municipality
  • China Postdoctoral Science Foundation
  • Harbin Institute of Technology
  • Key Technologies Research and Development Program of Heilongjiang Province

Zitieren

APA

Wu, J., Li, Z., Meng, W., Zheng, H., Jiang, F., Chen, M., & Wu, C. (2026). Model Design and Path Optimization of Perfusable Chips in Extrusion-Based Bioprinting: Linking Hydrogel Rheology with Structural Features. ACS Biomaterials Science & Engineering. https://doi.org/10.1021/acsbiomaterials.5c01878

Vancouver

Wu J, Li Z, Meng W, Zheng H, Jiang F, Chen M, et al. Model Design and Path Optimization of Perfusable Chips in Extrusion-Based Bioprinting: Linking Hydrogel Rheology with Structural Features. ACS Biomaterials Science & Engineering. 2026. doi:10.1021/acsbiomaterials.5c01878

BibTeX
@article{Wu2026,
  author = {Wu, Jiahao and Li, Zhitong and Meng, Weilin and Zheng, Haobin and Jiang, Fan and Chen, Mingjun and Wu, Chunya},
  title = {Model Design and Path Optimization of Perfusable Chips in Extrusion-Based Bioprinting: Linking Hydrogel Rheology with Structural Features},
  journal = {ACS Biomaterials Science & Engineering},
  year = {2026},
  doi = {10.1021/acsbiomaterials.5c01878}
}
Kostenlos starten →