Xanthan Gum and Tamarind Seed Polysaccharide Blend Bioinks: Toward Solving Printability‐Integrity Conundrum in Extrusion Bioprinting Without a Crosslinking Agent
Macromolecular Bioscience · 2026
DOI: 10.1002/mabi.202500181 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Bioscience, 2026. Verfasst von Aashwini Bhavsar und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Medical Devices, National Institute of Pharmaceutical Education and Research Kolkata, Kolkata, West Bengal, India. Hauptthemen laut MEDLINE: Polysaccharides, Bacterial, Bioprinting, Tamarindus, Polysaccharides. Die Arbeit nennt 35 Literaturangaben.
Abstract (Originalsprache)
Bioprinting technologies face challenges in designing bioinks that possess optimal pre‐ and post‐bioprinting properties. In most cases, enhancing flowability to improve pre‐bioprinting properties results in inferior mechanical properties of the post‐printed constructs. To achieve adequate mechanical strength, physical or chemical cross‐linking is used, which compromises the biocompatibility and degradability of the constructs. A xanthan gum (XG) and tamarind seed polysaccharide (TSP) blend bioink was developed to overcome these limitations. Amongst several ratios, 4XG:1TSP (4X1T) demonstrated the highest printability with accuracy >95%. Rheological investigations revealed shear thinning viscosity while the LVER and creep recovery for 4X1T (698 MPa, 97%) and 4X (624 MPa, 85%) showed suitable properties for bioprinting applications. FTIR indicated hydrogen‐bonding interactions between XG and TSP, conferring structural stability to the post‐printed constructs without any crosslinking agent. The constructs showed loss of microstructure after 21 days of incubation in phosphate buffer (pH 7.5) at 37°C. In vitro cytocompatibility studies with human‐derived SH‐SY5Y cells disclosed no significant difference between the viability of cells seeded on XG and 4X1T, or cells bioprinted with 4X1T bioinks. It is concluded that the XG‐TSP blend provides a bioink with promising printability, mechanical integrity, degradability, and cytocompatibility for the fabrication of tissue engineering constructs.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Medical Devices, National Institute of Pharmaceutical Education and Research Kolkata, Kolkata, West Bengal, India.
- Department of Pharmaceutics, National Institute of Pharmaceutical Education and Research Kolkata, Kolkata, West Bengal, India.
- Centre For Healthcare Science and Technology, Indian Institute of Engineering Science and Technology, Howrah, West Bengal, India.
- Department of Medicinal Chemistry, National Institute of Pharmaceutical Education and Research Kolkata, Kolkata, West Bengal, India.
ORCID-Profile: Pallab Datta
Zitieren
APA
Bhavsar, A., Das, P., Ojha, R. L., Dasgupta, S., Bandawar, N., Gupta, S., & Datta, P. (2026). Xanthan Gum and Tamarind Seed Polysaccharide Blend Bioinks: Toward Solving Printability‐Integrity Conundrum in Extrusion Bioprinting Without a Crosslinking Agent. Macromolecular Bioscience. https://doi.org/10.1002/mabi.202500181
Vancouver
Bhavsar A, Das P, Ojha RL, Dasgupta S, Bandawar N, Gupta S, et al. Xanthan Gum and Tamarind Seed Polysaccharide Blend Bioinks: Toward Solving Printability‐Integrity Conundrum in Extrusion Bioprinting Without a Crosslinking Agent. Macromolecular Bioscience. 2026. doi:10.1002/mabi.202500181
BibTeX
@article{Bhavsar2026,
author = {Bhavsar, Aashwini and Das, Priyanka and Ojha, Raj Lakshmi and Dasgupta, Shalini and Bandawar, Netraj and Gupta, Sreya and Datta, Pallab},
title = {Xanthan Gum and Tamarind Seed Polysaccharide Blend Bioinks: Toward Solving Printability‐Integrity Conundrum in Extrusion Bioprinting Without a Crosslinking Agent},
journal = {Macromolecular Bioscience},
year = {2026},
doi = {10.1002/mabi.202500181}
}
EUVIMED