Integration of 3% Silver-Doped Hydroxyapatite Coated on Alumina Using Radio Frequency Magnetron Sputtering for Superior Bioactivity, Mechanical and Electrical Properties, and Wear Resistance
ACS Biomaterials Science & Engineering · 12.05.2025 · 11 (5) · 2622-2638
DOI: 10.1021/acsbiomaterials.4c02471 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Biomaterials Science & Engineering, online erschienen am 30.04.2025. Verfasst von Ranbir Kumar und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, Birla Institute of Technology, Mesra, Ranchi, Jharkhand 835215, India. Hauptthemen laut MEDLINE: Aluminum Oxide, Silver, Durapatite, Coated Materials, Biocompatible. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 29 Literaturangaben. Gefördert von: Science and Engineering Research Board.
Abstract (Originalsprache)
The research investigates the integration of 3% silver-doped hydroxyapatite (Ag-HAP) onto a hexagonal alumina substrate with a matching structure to reduce interface strain utilizing radio frequency magnetron sputtering (RFMS). This method aims to improve film adhesion while enhancing the bioactivity, antimicrobial properties, and wear resistance of biomedical implants. Hydroxyapatite (HAP) has excellent biocompatibility and is widely used in bone implants due to its similarity to bone minerals, but it suffers from brittleness and limited mechanical strength. By doping Ag with HAP, mechanical and antimicrobial properties are enhanced, addressing infection and material longevity challenges. Alumina (Al2O3) is known for its mechanical strength and wear resistance, making it a suitable substrate for implants; however, its lack of bioactivity requires modification. The RFMS technique ensures a uniform and well-adhered nanocoating of Ag-HAP on alumina, creating a composite material that balances alumina's durability with silver-doped HAP bioactivity and antimicrobial benefits. The study reveals improved mechanical properties, such as increased hardness and wear resistance, along with enhanced antibacterial efficacy, making the composite material promising for orthopedic applications. The characterization of coatings using various analytical techniques such as EDS, FESEM, FTIR, and XRD confirms the formation and stability of Ag-HAP, while electrical properties are described by dielectric measurements. The changes in the lattice parameters, grain size, and pore size led to changes in hardness, coefficient of friction, and ultimately, the material's biocompatibility. Improvement in corrosion resistance after coating can be due to intermetallic compound formation at the interface. Biocompatibility was studied through assays that show favorable results, supporting the potential of Ag-HAP/Al2O3 in implantology. The mechanism of improvement in the antibacterial mechanism against E. coli and S. aureus is proposed. This research proposes a novel solution to implant-related challenges by combining silver-doped hydroxyapatite mechanical and biological advantages with alumina, thereby optimizing both biocompatibility and structural integrity for long-term use in biomedical implants.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Chemistry, Birla Institute of Technology, Mesra, Ranchi, Jharkhand 835215, India.
- Department of Physics, Birla Institute of Technology, Mesra, Ranchi, Jharkhand 835215, India.
- Departmenet of Chemistry, Utkal University, Bhubaneswar, Odisha 751004, India.
- Department of Chemistry, Wilson College, Mumbai, Maharashtra 400007, India.
- Department of Mechanical Engineering, Birla Institute of Technology, Mesra, Ranchi, Jharkhand 835215, India.
ORCID-Profile: Deep Shikha
Förderung
- Science and Engineering Research Board
Zitieren
APA
Kumar, R., Shikha, D., Anand, S., Sinha, S. K., Mohanty, P. K., Mhaske, S., Kumar, A., & Mukhopadhyay, A. (2025). Integration of 3% Silver-Doped Hydroxyapatite Coated on Alumina Using Radio Frequency Magnetron Sputtering for Superior Bioactivity, Mechanical and Electrical Properties, and Wear Resistance. ACS Biomaterials Science & Engineering, 11(5), 2622-2638. https://doi.org/10.1021/acsbiomaterials.4c02471
Vancouver
Kumar R, Shikha D, Anand S, Sinha SK, Mohanty PK, Mhaske S, et al. Integration of 3% Silver-Doped Hydroxyapatite Coated on Alumina Using Radio Frequency Magnetron Sputtering for Superior Bioactivity, Mechanical and Electrical Properties, and Wear Resistance. ACS Biomaterials Science & Engineering. 2025;11(5):2622-2638. doi:10.1021/acsbiomaterials.4c02471
BibTeX
@article{Kumar2025,
author = {Kumar, Ranbir and Shikha, Deep and Anand, Smit and Sinha, Sanjay Kumar and Mohanty, Paresh Kumar and Mhaske, Sanjay and Kumar, Abhinandan and Mukhopadhyay, Arkadeb},
title = {Integration of 3% Silver-Doped Hydroxyapatite Coated on Alumina Using Radio Frequency Magnetron Sputtering for Superior Bioactivity, Mechanical and Electrical Properties, and Wear Resistance},
journal = {ACS Biomaterials Science & Engineering},
year = {2025},
volume = {11},
number = {5},
pages = {2622--2638},
doi = {10.1021/acsbiomaterials.4c02471}
}
EUVIMED