Influence of Proteins and Building Direction on the Corrosion and Tribocorrosion of CoCrMo Fabricated by Laser Powder Bed Fusion
ACS Biomaterials Science & Engineering · 13.05.2024 · 10 (5) · 2880-2893
DOI: 10.1021/acsbiomaterials.3c01165 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Biomaterials Science & Engineering, online erschienen am 17.04.2024. Verfasst von Masoud Atapour und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Engineering, Isfahan University of Technology, Isfahan 84156-83111, Iran. Hauptthemen laut MEDLINE: Lasers, Serum Albumin, Bovine. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 94 Literaturangaben. Gefördert von: Western University, Ontario Research Foundation, Canada Research Chairs.
Abstract (Originalsprache)
Cobalt-chromium-molybdenum (CoCrMo) alloys are common wear-exposed biomedical alloys and are manufactured in multiple ways, increasingly using additive manufacturing processes such as laser powder bed fusion (LPBF). Here, we investigate the effect of proteins and the manufacturing process (wrought vs LPBF) and building orientation (LPBF-XY and XZ) on the corrosion, metal release, tribocorrosion, and surface oxide composition by means of electrochemical, mechanical, microscopic, diffractive, and spectroscopic methods. The study was conducted at pH 7.3 in 5 g/L NaCl and 5 mM 2-(N-morpholino) ethanesulfonic acid (MES) buffer, which was found to be necessary to avoid metal phosphate and metal-protein aggregate precipitation. The effect of 10 g/L bovine serum albumin (BSA) and 2.5 g/L fibrinogen (Fbn) was studied. BSA and Fbn strongly enhanced the release of Co, Cr, and Mo and slightly enhanced the corrosion (still in the passive domain) for all CoCrMo alloys and most for LPBF-XZ, followed by LPBF-XY and the wrought CoCrMo. BSA and Fbn, most pronounced when combined, significantly decreased the coefficient of friction due to lubrication, the wear track width and severity of the wear mechanism, and the tribocorrosion for all alloys, with no clear effect of the manufacturing type. The wear track area was significantly more oxidized than the area outside of the wear track. In the reference solution without proteins, a strong Mo oxidation in the wear track surface oxide was indicative of a pH decrease and cell separation of the anodic and cathodic areas. This effect was absent in the presence of the proteins.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Materials Engineering, Isfahan University of Technology, Isfahan 84156-83111, Iran.
- Department of Chemistry, The University of Western Ontario, London, Ontario, Canada N6A 5B7, Canada.
- Surface Science Western, The University of Western Ontario, London, Ontario N6G 0J3, Canada.
- Department of Chemical & Biochemical Engineering, The University of Western Ontario, London, Ontario N6A 5B9, Canada.
ORCID-Profile: Yolanda S Hedberg
Förderung
- Western University
- Ontario Research Foundation
- Canada Research Chairs
- Ministry of Science Research and Technology
- Avicenna Research Institute
- Natural Sciences and Engineering Research Council of Canada
- Taiho Kogyo Tribology Research Foundation
Zitieren
APA
Atapour, M., Standish, T. E., Henderson, J. D., Wei, Z., Dehnavi, V., & Hedberg, Y. S. (2024). Influence of Proteins and Building Direction on the Corrosion and Tribocorrosion of CoCrMo Fabricated by Laser Powder Bed Fusion. ACS Biomaterials Science & Engineering, 10(5), 2880-2893. https://doi.org/10.1021/acsbiomaterials.3c01165
Vancouver
Atapour M, Standish TE, Henderson JD, Wei Z, Dehnavi V, Hedberg YS. Influence of Proteins and Building Direction on the Corrosion and Tribocorrosion of CoCrMo Fabricated by Laser Powder Bed Fusion. ACS Biomaterials Science & Engineering. 2024;10(5):2880-2893. doi:10.1021/acsbiomaterials.3c01165
BibTeX
@article{Atapour2024,
author = {Atapour, Masoud and Standish, Thalia E and Henderson, Jeffrey D and Wei, Zheng and Dehnavi, Vahid and Hedberg, Yolanda S},
title = {Influence of Proteins and Building Direction on the Corrosion and Tribocorrosion of CoCrMo Fabricated by Laser Powder Bed Fusion},
journal = {ACS Biomaterials Science & Engineering},
year = {2024},
volume = {10},
number = {5},
pages = {2880--2893},
doi = {10.1021/acsbiomaterials.3c01165}
}
EUVIMED