EUVIMEDEUVIMED entdecken
Crossref

Effects of Zr Addition on the Microstructural Evolution, Mechanical Properties, and Corrosion Behavior of Novel Biomedical Ti–Zr–Mo–Mn Alloys

Zheng Li, Jin Wo, Yuanyue Fu, Xincheng Xu, Binbin Wang, Hui Liu, Deqiang You, Guodong Sun, Wei Li, Xiaojian Wang iD

ACS Biomaterials Science & Engineering · 2023

DOI: 10.1021/acsbiomaterials.3c01012 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Biomaterials Science & Engineering, 2023. Verfasst von Zheng Li und 9 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Advanced Wear & Corrosion Resistant and Functional Materials, Jinan University, Guangzhou 510632, China. Hauptthemen laut MEDLINE: Biocompatible Materials, Titanium. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 45 Literaturangaben. Gefördert von: Basic and Applied Basic Research Foundation of Guangdong Province, Department of Education of Guangdong Province, Fundamental Research Funds for the Central Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

β-Type Ti alloys have been widely investigated as implant materials owing to their excellent mechanical properties, corrosion resistance, and biocompatibility. In the present work, the effects of Zr on the microstructure, mechanical properties, and corrosion behaviors of Ti-Zr-Mo-Mn alloys were systematically studied. With the increase of Zr content, the phase composition gradually changed from intragranular-α + β of (TZ)5:1MM alloy to grain-boundary-α + β of (TZ)2:1MM alloy and finally transferred to a single β phase structure of (TZ)1:1MM alloy. The (TZ)1:1MM alloy exhibited a good mechanical combination with a yield strength of 750.8 MPa, an elastic modulus of 61.3 GPa, and a tensile ductility of 14.6%. Moreover, the addition of Zr can effectively stabilize the passivation film and reduce the sensitivity of microgalvanic corrosion in simulated body fluid, leading to enhanced corrosion resistance in the TZMM alloys. X-ray photoelectron spectroscopy analysis together with the ion-sputtering technique revealed that the passivation films formed on TZMM alloys possessed a bilayered structure (outer Ti+Zr mixed-oxide layer and inner Zr-oxide-rich layer), in which the inner Zr oxide layer plays an important role in the corrosion resistance of the TZMM alloys. In vitro biocompatibility evaluations demonstrated that the TZMM alloys can support cell adhesion and proliferation with high biocompatibility comparable to that of CP-Ti, while in vivo biocompatibility evaluations validated the bone osteointegration ability of TZMM alloys after long-term implantation. The above results indicate that novel TZMM alloys are promising candidates for implant material.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Biocompatible MaterialsTitaniumMaterials TestingCorrosionAlloysOxides

Stichwörter der Autor:innen

biocompatibilitybiomaterialscorrosion behaviorsβ-Ti alloys

Substanzen

Biocompatible MaterialsTitaniumTi-Zr alloyAlloysOxides

Autor:innen und Institutionen

  • Institute of Advanced Wear & Corrosion Resistant and Functional Materials, Jinan University, Guangzhou 510632, China.
  • Department of Orthopedics, The First Affiliated Hospital, Jinan University, Guangzhou 510630, China.
  • Institute of New Materials, Guangdong Academy of Sciences, National Engineering Research Center of Powder Metallurgy of Titanium & Rare Metals, Guangdong Provincial Key Laboratory of Metal Toughening Technology and Appl…
  • Guangdong Provincial Key Laboratory of Spine and Spinal Cord Reconstruction, The Fifth Affiliated Hospital (Heyuan Shenhe People's Hospital), Heyuan 517000, China.
  • Shaoguan Research Institute of Jinan University, 168 Muxi Avenue, Shaoguan 512029, China.
  • Guangdong Provincial Engineering & Technology Research Center for 3D Printing and Additive Manufacturing, Guangzhou 510632, China.

ORCID-Profile: Xiaojian Wang

Förderung

  • Basic and Applied Basic Research Foundation of Guangdong Province
  • Department of Education of Guangdong Province
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Li, Z., Wo, J., Fu, Y., Xu, X., Wang, B., Liu, H., You, D., Sun, G., Li, W., & Wang, X. (2023). Effects of Zr Addition on the Microstructural Evolution, Mechanical Properties, and Corrosion Behavior of Novel Biomedical Ti–Zr–Mo–Mn Alloys. ACS Biomaterials Science & Engineering. https://doi.org/10.1021/acsbiomaterials.3c01012

Vancouver

Li Z, Wo J, Fu Y, Xu X, Wang B, Liu H, et al. Effects of Zr Addition on the Microstructural Evolution, Mechanical Properties, and Corrosion Behavior of Novel Biomedical Ti–Zr–Mo–Mn Alloys. ACS Biomaterials Science & Engineering. 2023. doi:10.1021/acsbiomaterials.3c01012

BibTeX
@article{Li2023,
  author = {Li, Zheng and Wo, Jin and Fu, Yuanyue and Xu, Xincheng and Wang, Binbin and Liu, Hui and You, Deqiang and Sun, Guodong and Li, Wei and Wang, Xiaojian},
  title = {Effects of Zr Addition on the Microstructural Evolution, Mechanical Properties, and Corrosion Behavior of Novel Biomedical Ti–Zr–Mo–Mn Alloys},
  journal = {ACS Biomaterials Science & Engineering},
  year = {2023},
  doi = {10.1021/acsbiomaterials.3c01012}
}
Kostenlos starten →