Scalable and Printable Three-Phase Ion Gel Electrocatalyst Device
ACS Applied Catalysis · 2026
DOI: 10.1021/acsappcat.6c00054 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Catalysis, 2026. Verfasst von Justin A. Hopkins und 8 weiteren Autor:innen. Die Arbeit nennt 57 Literaturangaben. Gefördert von: Basic Energy Sciences.
Abstract (Originalsprache)
Scalable electrocatalyst systems that are mechanically robust, thermally stable, and compatible with large-area manufacturing are critical for advancing next-generation electrochemical technologies. Here, we present an ion gel-based electrocatalyst device platform capable of stable operation at elevated temperatures beyond the practical limits of many conventional polymer electrolyte systems. The device consists of a polybenzimidazole (PBI)- and 1-hexyl-3-methylimidazolium trifluoromethanesulfonate ([HMIM][OTf])-based ion gel integrated with Au electrodes and graphene- or carbon nanotube-supported Pt catalyst layers, demonstrating compatibility with scalable and solution-processable fabrication methods. Thermogravimetric analysis and infrared spectroscopy confirmed thermal stability beyond 200 °C without significant structural degradation. To demonstrate electrocatalytic operation at elevated temperature, formic acid electrocatalytic decomposition was investigated using formic acid electrooxidation and hydrogen evolution as the half-cell reactions. Under continuous 4 mol % formic acid gas flow at temperatures near 100 °C, the devices sustained stable steady-state electrocatalysis over multiday operation without observable ion gel degradation or device failure. Kinetic analysis revealed that open-circuit behavior differs substantially from conventional gas-phase thermocatalytic formic acid decomposition on Pt, whereas closed-circuit operation followed the expected kinetic trends for Au-limited formic acid electrooxidation suggesting that the observed rates were not governed solely by mass transport. These results demonstrate that ion gel-based electrocatalyst devices provide a thermally durable and manufacturing-compatible platform for elevated-temperature electrochemical applications.
Förderung
- Basic Energy Sciences
Zitieren
APA
Hopkins, J. A., Kim, C., Xiong, R., Lee, W., Canavan, J. R., Abdelrahman, O. A., Stoerzinger, K. A., Frisbie, C. D., & Dauenhauer, P. J. (2026). Scalable and Printable Three-Phase Ion Gel Electrocatalyst Device. ACS Applied Catalysis. https://doi.org/10.1021/acsappcat.6c00054
Vancouver
Hopkins JA, Kim C, Xiong R, Lee W, Canavan JR, Abdelrahman OA, et al. Scalable and Printable Three-Phase Ion Gel Electrocatalyst Device. ACS Applied Catalysis. 2026. doi:10.1021/acsappcat.6c00054
BibTeX
@article{Hopkins2026,
author = {Hopkins, Justin A. and Kim, Chaehoon and Xiong, Ruixue and Lee, Wonwoo and Canavan, Jesse R. and Abdelrahman, Omar A. and Stoerzinger, Kelsey A. and Frisbie, C. Daniel and Dauenhauer, Paul J.},
title = {Scalable and Printable Three-Phase Ion Gel Electrocatalyst Device},
journal = {ACS Applied Catalysis},
year = {2026},
doi = {10.1021/acsappcat.6c00054}
}
EUVIMED