EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Scalable 3-D-Printable Antenna Array With Liquid Cooling for 28 GHz

Jaakko Haarla, Juha Ala-Laurinaho, Ville Viikari

IEEE Transactions on Antennas and Propagation · 2023-06 · 71 (6) · 5067-5078

DOI: 10.1109/tap.2023.3264861 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Antennas and Propagation, 2023-06. Verfasst von Jaakko Haarla und 2 weiteren Autor:innen. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Business Finland Project RF Sampo.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article presents a scalable and compact 3-D-printed Vivaldi antenna array with liquid cooling for the frequency band from 24.0 to 29.5 GHz. The proposed design consists of an $8 \times 8$ antenna array with commercial beam-forming integrated circuits (ICs) on the antenna side of the PCB for efficient PCB area utilization that enables a high integration level. Scalable liquid cooling is integrated into the 3-D-printed antenna array. The measured temperature with water cooling during operation remains below $50 ^{\circ} \text{C}$ . The simulated total active reflection coefficient (TARC) of the unit cell is lower than −9.6 dB for beam steering angles up to 57° from the broadside. The effective isotropic radiated power (EIRP) of the prototypes is up to 59.7 dBm.

Förderung

  • Business Finland Project RF Sampo

Zitieren

APA

Haarla, J., Ala-Laurinaho, J., & Viikari, V. (2023). Scalable 3-D-Printable Antenna Array With Liquid Cooling for 28 GHz. IEEE Transactions on Antennas and Propagation, 71(6), 5067-5078. https://doi.org/10.1109/tap.2023.3264861

Vancouver

Haarla J, Ala-Laurinaho J, Viikari V. Scalable 3-D-Printable Antenna Array With Liquid Cooling for 28 GHz. IEEE Transactions on Antennas and Propagation. 2023;71(6):5067-5078. doi:10.1109/tap.2023.3264861

BibTeX
@article{Haarla2023,
  author = {Haarla, Jaakko and Ala-Laurinaho, Juha and Viikari, Ville},
  title = {Scalable 3-D-Printable Antenna Array With Liquid Cooling for 28 GHz},
  journal = {IEEE Transactions on Antennas and Propagation},
  year = {2023},
  volume = {71},
  number = {6},
  pages = {5067--5078},
  doi = {10.1109/tap.2023.3264861}
}
Kostenlos starten →