Glycidyl Methacrylate-Grafted Poly(vinylidene fluoride- co -chlorotrifluoroethylene) as Solution-Processable and Ultraviolet-Cross-Linkable Fluoropolymer-Based Coating Material
ACS Applied Polymer Materials · 03.11.2026
DOI: 10.1021/acsapm.6c03008 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Polymer Materials, online erschienen am 03.11.2026. Verfasst von Yeonju Maeng und 6 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Gefördert von: Korea Health Industry Development Institute, Korea Research Institute of Chemical Technology, National Research Foundation of Korea.
Abstract (Originalsprache)
Fluoropolymer coatings are attractive for advanced surface-protection applications owing to their chemical resistance, thermal stability, low surface energy, and nonstick characteristics. However, their poor solution processability and weak interfacial compatibility often limit practical coating applications. Herein, we report a solution-processable and ultraviolet (UV)-post-cross-linkable fluoropolymer, poly(vinylidene fluoride-co-chlorotrifluoroethylene)-grafted-glycidyl methacrylate P(VDF-CTFE)-g-GMA, prepared by graft polymerization of GMA from a P(VDF-CTFE) backbone. By controlling the GMA feed ratio, graft copolymers with different epoxy functionalities were synthesized, and their structures were confirmed by Fourier-transform infrared spectroscopy and proton nuclear magnetic resonance spectroscopy. After blade coating of the polymer solution containing a photoacid generator, the films were cross-linked by UV irradiation through cationic ring-opening reactions of the epoxy groups. Solvent immersion tests and time-dependent Fourier-transform infrared spectroscopy (FT-IR) analysis confirmed the formation of an insoluble cross-linked network, while thermogravimetric analysis revealed changes in thermal decomposition behavior after UV curing. The cross-linked films also showed selective patternability through localized UV exposure and solvent development, increased gel content with UV exposure time, and water contact angles comparable to pristine P(VDF-CTFE). In addition, the cross-linked films demonstrated enhanced cross-cut adhesion on glass, aluminum, and silicon wafer substrates. These results indicate that P(VDF-CTFE)-g-GMA is a promising platform for solution-processable, UV-cross-linkable, and patternable fluoropolymer coatings.
Förderung
- Korea Health Industry Development Institute
- Korea Research Institute of Chemical Technology
- National Research Foundation of Korea
Zitieren
APA
Maeng, Y., Choi, S. W., Kim, D. H., Jeong, S., Kim, J., You, J. B., & Kim, J. H. (2026). Glycidyl Methacrylate-Grafted Poly(vinylidene fluoride- co -chlorotrifluoroethylene) as Solution-Processable and Ultraviolet-Cross-Linkable Fluoropolymer-Based Coating Material. ACS Applied Polymer Materials. https://doi.org/10.1021/acsapm.6c03008
Vancouver
Maeng Y, Choi SW, Kim DH, Jeong S, Kim J, You JB, et al. Glycidyl Methacrylate-Grafted Poly(vinylidene fluoride- co -chlorotrifluoroethylene) as Solution-Processable and Ultraviolet-Cross-Linkable Fluoropolymer-Based Coating Material. ACS Applied Polymer Materials. 2026. doi:10.1021/acsapm.6c03008
BibTeX
@article{Maeng2026,
author = {Maeng, Yeonju and Choi, Sung Wook and Kim, Deok Hoon and Jeong, Soo-Hwan and Kim, Ji-Won and You, Jae Bem and Kim, Ju Hyeon},
title = {Glycidyl Methacrylate-Grafted Poly(vinylidene fluoride- co -chlorotrifluoroethylene) as Solution-Processable and Ultraviolet-Cross-Linkable Fluoropolymer-Based Coating Material},
journal = {ACS Applied Polymer Materials},
year = {2026},
doi = {10.1021/acsapm.6c03008}
}
EUVIMED