EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Strain and Structural Evolution in Carbon Fiber-Reinforced Polyamide-4,10 Composites during Tensile Cycling to Failure

Alexander Harold Sexton, Katarzyna Janik, Andrei Chumakov, László Almásy, Jakob Kjelstrup-Hansen, Luigi Balzano, Matti Knaapila

ACS Applied Polymer Materials · 13.11.2026 · 8 (21) · 19113-19124

DOI: 10.1021/acsapm.6c02797 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Polymer Materials, online erschienen am 21.10.2026. Verfasst von Alexander Harold Sexton und 6 weiteren Autor:innen. Die Arbeit nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Danmarks Frie Forskningsfond, HORIZON EUROPE Research Infrastructures, Dutch Polymer Institute.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We report residual strain buildup in unidirectional carbon fiber-reinforced polyamide-4,10 composite tapes during low-strain-rate (10–4 s–1) tensile cycling to failure, with fibers oriented 45° relative to the load. Macroscopic strain is attributed to crystal lattice elasticity and unit-cell frustration (one-third) and to amorphous shear deformation (two-thirds), accompanied by fiber reorientation, where the angle decreases below the nominal 45°. The carbon–matrix transcrystalline layer exhibits a higher preferential crystalline orientation than the bulk matrix. Tensile properties were measured simultaneously with microfocused small-angle and wide-angle X-ray scattering (SAXS/WAXS) in situ, enabling direct correlation between mechanical response and structural evolution. In addition, the 100 reflection of the polymer α phase is identified as a fingerprint of composite failure. The material moisture content (1.3%) is lower than in more common polyamides and was assessed by small-angle neutron scattering (SANS). These results provide a structural basis for data-driven models to predict lifetime of the investigated composite system under cyclic loading.

Förderung

  • Danmarks Frie Forskningsfond
  • HORIZON EUROPE Research Infrastructures
  • Dutch Polymer Institute

Zitieren

APA

Sexton, A. H., Janik, K., Chumakov, A., Almásy, L., Kjelstrup-Hansen, J., Balzano, L., & Knaapila, M. (2026). Strain and Structural Evolution in Carbon Fiber-Reinforced Polyamide-4,10 Composites during Tensile Cycling to Failure. ACS Applied Polymer Materials, 8(21), 19113-19124. https://doi.org/10.1021/acsapm.6c02797

Vancouver

Sexton AH, Janik K, Chumakov A, Almásy L, Kjelstrup-Hansen J, Balzano L, et al. Strain and Structural Evolution in Carbon Fiber-Reinforced Polyamide-4,10 Composites during Tensile Cycling to Failure. ACS Applied Polymer Materials. 2026;8(21):19113-19124. doi:10.1021/acsapm.6c02797

BibTeX
@article{Sexton2026,
  author = {Sexton, Alexander Harold and Janik, Katarzyna and Chumakov, Andrei and Almásy, László and Kjelstrup-Hansen, Jakob and Balzano, Luigi and Knaapila, Matti},
  title = {Strain and Structural Evolution in Carbon Fiber-Reinforced Polyamide-4,10 Composites during Tensile Cycling to Failure},
  journal = {ACS Applied Polymer Materials},
  year = {2026},
  volume = {8},
  number = {21},
  pages = {19113--19124},
  doi = {10.1021/acsapm.6c02797}
}
Kostenlos starten →