EUVIMEDObjevte EUVIMED
Open access · CC BY 4.0

Melt Rheology to Guide Commercial Polypropylene Grade Selection in Material-Extrusion Additive Manufacturing

Mohamed I. Nour, Yimin Yao, Ahmed O. Adisa, Sandeep Tripathi, Kevin J. Decker Ramos, Amy M. Peterson, Michael J. Bortner

ACS Applied Polymer Materials · 2026-08-14 · 8 (15) · 13084-13098

DOI: 10.1021/acsapm.6c02100 ↗

At a glance

Journal article in ACS Applied Polymer Materials, published online on 2026-07-24. Written by Mohamed I. Nour and 6 co-authors. 35 references. The full text is freely available (open access, CC BY 4.0).

AbstraktBibliografické údajeCiteRelated studies

Abstract (original language)

Filament-based material extrusion additive manufacturing (MEAM) is a well-established technique in additive manufacturing (AM). However, semicrystalline polymers, such as polypropylene (PP), have seen limited commercial use in MEAM processes historically because of their rapid crystallization kinetics, which adversely affect the integrity of printed structures. While prior research has explored PP blends and composites to improve printability, the influence of varying properties among commercial PP grades, despite similar molecular weights (MWs) and molecular weight distributions (MWDs), remains underexplored. These grades differ in properties such as melt flow index (MFI), additive content, and polymer architecture. Although MFI is widely used as a rapid measure of processability and, indirectly, mechanical performance, it does not account for the effects of additives, crystallinity, or molecular architecture. As such, MFI alone may not reliably predict the print quality or mechanical properties. In this work, melt rheological parameters, particularly the storage/loss modulus crossover point, are evaluated as complementary indicators for selecting PP grades for MEAM. Different commercial PP grades, blended with a fixed loading of a hydrocarbon resin to control crystallization rates and enhance interlayer adhesion by extending re-entanglement times, were subjected to melt rheological measurements to assess their suitability for MEAM. The resulting rheological profiles correlate with increased polymer chain interdiffusion and reduced warpage in printed structures while also revealing trade-offs such as reduced tensile strength and increased sensitivity to print orientation. Notably, PP1B and PP2 exhibit similar MFI values but markedly different rheological responses and structural properties of the prints, demonstrating that MFI alone is insufficient to predict MEAM performance across neat and modified commercial PP grades. This rheological approach provides a practical method for predicting the structural integrity and mechanical performance of PP-based MEAM parts, enabling more informed material selection than relying on MFI alone.

Cite

APA

Nour, M. I., Yao, Y., Adisa, A. O., Tripathi, S., Ramos, K. J. D., Peterson, A. M., & Bortner, M. J. (2026). Melt Rheology to Guide Commercial Polypropylene Grade Selection in Material-Extrusion Additive Manufacturing. ACS Applied Polymer Materials, 8(15), 13084-13098. https://doi.org/10.1021/acsapm.6c02100

Vancouver

Nour MI, Yao Y, Adisa AO, Tripathi S, Ramos KJD, Peterson AM, et al. Melt Rheology to Guide Commercial Polypropylene Grade Selection in Material-Extrusion Additive Manufacturing. ACS Applied Polymer Materials. 2026;8(15):13084-13098. doi:10.1021/acsapm.6c02100

BibTeX
@article{Nour2026,
  author = {Nour, Mohamed I. and Yao, Yimin and Adisa, Ahmed O. and Tripathi, Sandeep and Ramos, Kevin J. Decker and Peterson, Amy M. and Bortner, Michael J.},
  title = {Melt Rheology to Guide Commercial Polypropylene Grade Selection in Material-Extrusion Additive Manufacturing},
  journal = {ACS Applied Polymer Materials},
  year = {2026},
  volume = {8},
  number = {15},
  pages = {13084--13098},
  doi = {10.1021/acsapm.6c02100}
}
Start for free →