EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tailorable Piezoelectric Chain Morphology in Biocompatible Poly- l -lactide Induced by Melt-Based 3D Printing

Cristina Pascual-González iD, Gustavo Pacheco-Carpio, Juan P Fernández-Blázquez iD, María Concepción Serrano iD, Bernd Wicklein iD, Miguel Algueró, Harvey Amorín iD

ACS Applied Polymer Materials · 23.05.2025 · 7 (10) · 6067-6081

DOI: 10.1021/acsapm.5c00450 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Polymer Materials, online erschienen am 06.05.2025. Verfasst von Cristina Pascual-González und 6 weiteren Autor:innen. Beteiligte Einrichtung: Instituto de Ciencia de Materiales de Madrid (ICMM), CSIC, C/Sor Juana Inés de la Cruz 3, Cantoblanco, 28049 Madrid, Spain. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 73 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agencia Estatal de Investigaci?n, European Regional Development Fund.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High Resolution Image Download MS PowerPoint Slide Biobased and biodegradable poly- l -lactide (PLLA) stands out among piezoelectric polymers for its biocompatibility and environmental sustainability. Its piezoelectric response is closely related to the crystallinity and the alignment of polymer chains, which is conventionally obtained by drawing techniques. These are two-step processes with tight shape constraints, and the material technology implementation would strongly benefit from the demonstration of a single-step process capable of directly achieving tailored piezoelectric morphology in PLLA biopolymer from polymer melt. Fused deposition modeling (FDM) three-dimensional (3D) printing can play this role, directly achieving tailored piezoelectric morphology in PLLA biopolymer by the microscale control of molecular chain orientation through preparation parameters, such as 3D printing speed or bed temperature. The printing-crystal phase content and texture-piezoelectric property relationships are comprehensively presented, and the key 3D printing parameters to obtain optimized piezoelectric chain morphologies are defined. Results reveal melt-based 3D printing to be a suitable technique for manufacturing biocompatible PLLA piezoelectric platforms that are also biodegradable. A commercial PLLA (molecular weight of 160 kDa) has been used, with which a large shear piezoelectric coefficient ( d 14 = 8.5 pC/N) was attained after optimized printing. Biocompatibility in vitro with murine L929 fibroblasts is confirmed for this specific material, opening its use not only for smart monitoring but also for biomedical applications, including tissue engineering.

Schlagwörter

Stichwörter der Autor:innen

crystallinityfused deposition modelingpiezoelectricitypoly-l-lactidepolymer orientation

Autor:innen und Institutionen

  • Instituto de Ciencia de Materiales de Madrid (ICMM), CSIC, C/Sor Juana Inés de la Cruz 3, Cantoblanco, 28049 Madrid, Spain.
  • IMDEA Materials Institute, C/Eric Kandel 2, Getafe, 28906 Madrid, Spain.

ORCID-Profile: Cristina Pascual-González, Juan P Fernández-Blázquez, María Concepción Serrano, Bernd Wicklein, Harvey Amorín

Förderung

  • Agencia Estatal de Investigaci?n
  • European Regional Development Fund

Zitieren

APA

Pascual-González, C., Pacheco-Carpio, G., Fernández-Blázquez, J. P., Serrano, M. C., Wicklein, B., Algueró, M., & Amorín, H. (2025). Tailorable Piezoelectric Chain Morphology in Biocompatible Poly- l -lactide Induced by Melt-Based 3D Printing. ACS Applied Polymer Materials, 7(10), 6067-6081. https://doi.org/10.1021/acsapm.5c00450

Vancouver

Pascual-González C, Pacheco-Carpio G, Fernández-Blázquez JP, Serrano MC, Wicklein B, Algueró M, et al. Tailorable Piezoelectric Chain Morphology in Biocompatible Poly- l -lactide Induced by Melt-Based 3D Printing. ACS Applied Polymer Materials. 2025;7(10):6067-6081. doi:10.1021/acsapm.5c00450

BibTeX
@article{PascualGonzlez2025,
  author = {Pascual-González, Cristina and Pacheco-Carpio, Gustavo and Fernández-Blázquez, Juan P and Serrano, María Concepción and Wicklein, Bernd and Algueró, Miguel and Amorín, Harvey},
  title = {Tailorable Piezoelectric Chain Morphology in Biocompatible Poly- l -lactide Induced by Melt-Based 3D Printing},
  journal = {ACS Applied Polymer Materials},
  year = {2025},
  volume = {7},
  number = {10},
  pages = {6067--6081},
  doi = {10.1021/acsapm.5c00450}
}
Kostenlos starten →