EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

A Dual-sensitive Hydrogel Based on Poly(Lactide-co-Glycolide)-Polyethylene GlycolPoly(Lactide-co-Glycolide) Block Copolymers for 3D Printing

Yang Zhou, Yuecheng Cui, Li-Qun Wang

International Journal of Bioprinting · 02.08.2024 · 7 (3) · 389

DOI: 10.18063/ijb.v7i3.389 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Bioprinting, online erschienen am 02.08.2024. Verfasst von Yang Zhou und 2 weiteren Autor:innen. Beteiligte Einrichtung: MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering, Zhejiang University, Hangzhou 31…. Die Arbeit wurde bisher 12-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The thermo-sensitive hydrogel formed by triblock copolymers of polyethylene glycols and aliphatic polyesters serves as a promising candidate for bioink due to its excellent biodegradability and biocompatibility. However, the thermocrosslinking alone cannot achieve a robust hydrogel to support the 3D printed constructs without collapse. Herein, a photocrosslinkable group was introduced into the triblock copolymers to achieve a dual-sensitive hydrogel. A triblock copolymer poly(lactide-co-glycolide)-polyethylene glycol-poly(lactide-co-glycolide) decorated with acrylate group in the chain end was prepared. The obtained aqueous solutions of the copolymers could transform into hydrogels with excellent shear thinning properties and rapid elastic recovery properties spontaneously on the increase of temperature. The resulted thermogels also allowed for photo-crosslinking by exposure to ultraviolet radiation, with storage modulus dramatically increased to stable the printed constructs. Through a two-step crosslinking strategy, complicated tissue-like constructs with high shape fidelity can be printed using the dual-sensitive inks. Moreover, the mechanical strength, swelling ratio, and printability of the hydrogels can be tuned by varying the substitution rate of the acrylate group without compromising the inks’ extrudability. We expect that the dual-sensitive hydrogels may be used as bioinks to print large constructs for applications in tissue engineering.

Schlagwörter

Stichwörter der Autor:innen

3D bioprintingDual-sensitive hydrogelsInjectable hydrogelsPoly(lactide-co-glycolide)-polyethylene glycol-poly(lactide-co-glycolide)

Autor:innen und Institutionen

  • MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering, Zhejiang University, Hangzhou 310027, P. R. China.
  • Hangzhou Medsun Biological Technology Co., Ltd, Hangzhou Economic and Technological Development Area, Hangzhou 310027, P. R. China.

Zitieren

APA

Zhou, Y., Cui, Y., & Wang, L. Q. (2024). A Dual-sensitive Hydrogel Based on Poly(Lactide-co-Glycolide)-Polyethylene GlycolPoly(Lactide-co-Glycolide) Block Copolymers for 3D Printing. International Journal of Bioprinting, 7(3), 389. https://doi.org/10.18063/ijb.v7i3.389

Vancouver

Zhou Y, Cui Y, Wang LQ. A Dual-sensitive Hydrogel Based on Poly(Lactide-co-Glycolide)-Polyethylene GlycolPoly(Lactide-co-Glycolide) Block Copolymers for 3D Printing. International Journal of Bioprinting. 2024;7(3):389. doi:10.18063/ijb.v7i3.389

BibTeX
@article{Zhou2024,
  author = {Zhou, Yang and Cui, Yuecheng and Wang, Li-Qun},
  title = {A Dual-sensitive Hydrogel Based on Poly(Lactide-co-Glycolide)-Polyethylene GlycolPoly(Lactide-co-Glycolide) Block Copolymers for 3D Printing},
  journal = {International Journal of Bioprinting},
  year = {2024},
  volume = {7},
  number = {3},
  pages = {389},
  doi = {10.18063/ijb.v7i3.389}
}
Kostenlos starten →