EUVIMEDEUVIMED entdecken
Crossref

Rapid, Temperature-Failsafe Magnetic Induction Processing of Adhesives Using Coprecipitation-Synthesized Mn−Zn Ferrite Nanoparticles

Jiaojiao Wang, Anshul Baral, Muralidhar Yadav, Terry W.J. Steele, Raju V. Ramanujan

ACS Applied Nano Materials · 06.11.2026 · 9 (44) · 20610-20623

DOI: 10.1021/acsanm.6c03169 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Nano Materials, online erschienen am 24.10.2026. Verfasst von Jiaojiao Wang und 4 weiteren Autor:innen. Die Arbeit nennt 64 Literaturangaben. Gefördert von: Ministry of Education - Singapore, National Research Foundation Singapore, Nanyang Technological University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Magnetic induction heating of Curie nanoparticles (CNPs), termed “Spinheat”, offers a rapid, temperature-failsafe alternative to conventional curing of adhesives, which consumes substantial energy and requires prolonged heating. Mn−Zn ferrite CNPs combine tunable Curie temperatures (Tc) with heat generation under an alternating magnetic field (AMF), making them suitable transducers. An aqueous coprecipitation route was developed to prepare Mn−Zn ferrite (MnxZn1−xFe2O4, 0 ≤ x ≤ 1) CNPs, achieving a recovered-mass yield of ∼98%. Across the series of Mn−Zn ferrites, Tc was tuned from 107 to 334 °C, and the dry-state specific absorption rate (SAR) was correlated with composition, structure, particle and crystallite sizes, and magnetic properties. As-synthesized Mn0.9Zn0.1Fe2O4 (particle size ∼12 nm) exhibited the highest dry-powder SAR of 11 W/g at 140 Oe and 400 kHz (intrinsic loss power of 0.22 nH·m2/kg), exceeding prior dry-powder reports by more than tenfold. Annealing increased saturation magnetization but markedly reduced the SAR in the Mn-rich compositions, accompanied by particle growth from ∼5−15 nm to 300−400 nm. CNPs with Tc near 190 °C enabled 5 min induction curing of a commercial epoxy adhesive, achieving ∼19 MPa lap-shear strength (vs ∼15 MPa for oven curing), no discoloration, and ∼1.6% of the oven energy. These findings highlight the potential of Mn−Zn ferrite CNPs prepared via coprecipitation for rapid, energy-efficient adhesive and resin processing.

Förderung

  • Ministry of Education - Singapore
  • National Research Foundation Singapore
  • Nanyang Technological University

Zitieren

APA

Wang, J., Baral, A., Yadav, M., Steele, T. W., & Ramanujan, R. V. (2026). Rapid, Temperature-Failsafe Magnetic Induction Processing of Adhesives Using Coprecipitation-Synthesized Mn−Zn Ferrite Nanoparticles. ACS Applied Nano Materials, 9(44), 20610-20623. https://doi.org/10.1021/acsanm.6c03169

Vancouver

Wang J, Baral A, Yadav M, Steele TW, Ramanujan RV. Rapid, Temperature-Failsafe Magnetic Induction Processing of Adhesives Using Coprecipitation-Synthesized Mn−Zn Ferrite Nanoparticles. ACS Applied Nano Materials. 2026;9(44):20610-20623. doi:10.1021/acsanm.6c03169

BibTeX
@article{Wang2026,
  author = {Wang, Jiaojiao and Baral, Anshul and Yadav, Muralidhar and Steele, Terry W.J. and Ramanujan, Raju V.},
  title = {Rapid, Temperature-Failsafe Magnetic Induction Processing of Adhesives Using Coprecipitation-Synthesized Mn−Zn Ferrite Nanoparticles},
  journal = {ACS Applied Nano Materials},
  year = {2026},
  volume = {9},
  number = {44},
  pages = {20610--20623},
  doi = {10.1021/acsanm.6c03169}
}
Kostenlos starten →