EUVIMEDEUVIMED entdecken
Crossref

Cr-substituted Co-Zn ferrite nanoparticles for magnetic hyperthermia: tuning magnetic anisotropy and induction heating

Abhinava Goswami, Gongotree Phukan, Jyoti Prasad Borah, Surajit Bhattacharjee, Syed A Hussain, Soham Maiti, Ibetombi Soibam

Physica Scripta · 11.11.2026

DOI: 10.1088/1402-4896/aec0dc ↗

Kurz gefasst

Fachartikel in der Zeitschrift Physica Scripta, online erschienen am 11.11.2026. Verfasst von Abhinava Goswami und 6 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Magnetic hyperthermia requires nanoparticles whose heat output can be tuned while the material remains biocompatible. Here, Cr-substituted Co–Zn ferrite nanoparticles, Co 0.6 Zn 0.4 Cr x Fe 2−x O 4 (x = 0, 0.1, 0.2, 0.3), were synthesised by auto-combustion and calcined at 500 ο C for 2 h. X-ray diffraction confirmed a single-phase cubic spinel, with the lattice constant and crystallite size decreasing from 8.4039 Å and 34 nm to 8.3947 Å and 25 nm as the smaller Cr 3+ ions replaced Fe 3+ , and electron-microscopy particle diameters decreased from 38.55 to 31.96 nm. Cr substitution reduced the saturation magnetisation from 58.73 to 36.13 A m 2 kg −1 and the effective anisotropy constant from 134.5 to 82.4 kJ m −3 , lowering the anisotropy energy barrier to 0.35 of its unsubstituted value, with the decreases in particle volume and anisotropy contributing about equally. Under a field of 14.92 kA m −1 at 337 kHz, the specific absorption rate (SAR) at 0.5 mg mL −1 decreased from 342 to 251 W g −1 and the intrinsic loss power from 4.57 to 3.34 nH m 2 kg −1 . SAR was higher at 0.5 than at 1 mg mL −1 for every composition, consistent with interparticle interactions. After a 600 s exposure, the unsubstituted sample exceeded 47 ο C at both concentrations, whereas the x = 0.3 sample at 0.5 mg mL −1 reached 46.47 ο C, within the 42–47 ο C therapeutic range, with the temperature still rising at the end of the exposure. In vitro assays showed less than 4% haemolysis for all samples and cell viabilities above 90% for the higher-Cr samples. Cr substitution therefore offers a compositional route to lower, tunable heating output in Co–Zn ferrite nanoparticles while retaining appreciable heating efficiency.

Zitieren

APA

Goswami, A., Phukan, G., Borah, J. P., Bhattacharjee, S., Hussain, S. A., Maiti, S., & Soibam, I. (2026). Cr-substituted Co-Zn ferrite nanoparticles for magnetic hyperthermia: tuning magnetic anisotropy and induction heating. Physica Scripta. https://doi.org/10.1088/1402-4896/aec0dc

Vancouver

Goswami A, Phukan G, Borah JP, Bhattacharjee S, Hussain SA, Maiti S, et al. Cr-substituted Co-Zn ferrite nanoparticles for magnetic hyperthermia: tuning magnetic anisotropy and induction heating. Physica Scripta. 2026. doi:10.1088/1402-4896/aec0dc

BibTeX
@article{Goswami2026,
  author = {Goswami, Abhinava and Phukan, Gongotree and Borah, Jyoti Prasad and Bhattacharjee, Surajit and Hussain, Syed A and Maiti, Soham and Soibam, Ibetombi},
  title = {Cr-substituted Co-Zn ferrite nanoparticles for magnetic hyperthermia: tuning magnetic anisotropy and induction heating},
  journal = {Physica Scripta},
  year = {2026},
  doi = {10.1088/1402-4896/aec0dc}
}
Kostenlos starten →