Waterborne-Polyurethane as High-Performance Binder for Cathodes of Lithium-Ion Batteries
ACS Applied Materials & Interfaces · 10.11.2026
DOI: 10.1021/acsami.6c18877 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 10.11.2026. Verfasst von Mengwei Huo und 4 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Functional Polymer Materials of the Ministry of Education, Institute of Polymer Chemistry, College of Chemistry, Nankai University,…. Die Arbeit nennt 66 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Ministry of Science and Technology of the People's Republic of China.
Abstract (Originalsprache)
In lithium-ion batteries, the electrodes are strongly influenced by the polymer binder swelling in liquid electrolytes, which governs electrode integrity, adhesion, flexibility and Li+ transport. Herein, a series of polyacrylate-terminated waterborne polyurethanes (WPUAs) are designed by systematically varying the proportions of nonionic, anionic, and zwitterionic monomers to regulate swelling behavior in liquid electrolytes. The compositional modulation influences the polymer polarity, polymer entanglement, polymer mechanical property and their swelling in electrolytes, and finally the final electrochemical performance of WPUAs. The optimized WPUA exhibits a balanced swelling ratio, strong adhesion, and significantly enhanced Li+ diffusion. Density functional theory calculation reveals that the molecular configuration is rational and conducive to the Li+ transport, which are supported by its superior Li+ conductivity and diffusion coefficient of lithium ions much higher than those of the polyvinylidene fluoride (PVDF) binder. The calculated diffusion coefficient of lithium ions in WPUA is 2.43 × 10–12 cm2 s–1, which is twice times higher than that in PVDF. Employing the synthesized WPUA binder, the assembled LiFePO4@Li half cells show improved electrochemical performance of 110.8 mAh g–1 at 3C for over 800 cycles with 80.4% capacity retention and the high-loading LiFePO4@artificial graphite full cells also show improved performance of 135.0 mAh g–1 after 340 cycles with 87.1% capacity retention, both of which exhibit better electrochemical performance than PVDF. This work highlights controlled binder swelling as a key design parameter for balancing electrolyte accessibility, Li+ transport, and electrode integrity, offering useful guidance for the development of high-performance waterborne binders for lithium-ion batteries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of Functional Polymer Materials of the Ministry of Education, Institute of Polymer Chemistry, College of Chemistry, Nankai University, Tianjin300071, China.
- Xi'an Shiyou University , Xi'an, 710065China.
- Frontiers Science Center for New Organic Matter, Nankai University, Tianjin300071, China.
- Tianjin Key Laboratory of Functional Polymer Materials, Nankai University, Tianjin300071, China.
ORCID-Profile: Zhe Shi, Wangqing Zhang
Förderung
- National Natural Science Foundation of China
- Ministry of Science and Technology of the People's Republic of China
Zitieren
APA
Huo, M., Li, X., Shi, Z., Song, B., & Zhang, W. (2026). Waterborne-Polyurethane as High-Performance Binder for Cathodes of Lithium-Ion Batteries. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.6c18877
Vancouver
Huo M, Li X, Shi Z, Song B, Zhang W. Waterborne-Polyurethane as High-Performance Binder for Cathodes of Lithium-Ion Batteries. ACS Applied Materials & Interfaces. 2026. doi:10.1021/acsami.6c18877
BibTeX
@article{Huo2026,
author = {Huo, Mengwei and Li, Xuewei and Shi, Zhe and Song, Boyi and Zhang, Wangqing},
title = {Waterborne-Polyurethane as High-Performance Binder for Cathodes of Lithium-Ion Batteries},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
doi = {10.1021/acsami.6c18877}
}
EUVIMED