Exploring Phenolphthalein Polyarylethers as High‐Performance Alternative Binders for High‐Voltage Cathodes in Lithium‐Ion Batteries
Small · 2024-10 · 20 (43)
DOI: 10.1002/smll.202403993 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 20.06.2024. Verfasst von Kai Yang und 9 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Precision Blasting, Jianghan University, Wuhan, 430056, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 37 Literaturangaben. Gefördert von: National Natural Science Foundation of China, State Key Laboratory of Precision Blasting, Jianghan University, JHUN.
Abstract (Originalsprache)
Polyvinylidene fluoride (PVDF) has unique electrochemical oxidation resistance and is the only binder for high‐voltage cathode materials in the battery industry for a long time. However, PVDF still has some drawbacks, such as environmental limitations on fluorine, strict requirements for environmental humidity, weak adhesion, and poor lithium ion conductivity. Herein, the long‐standing issues associated with high‐voltage lithium cobalt oxide (LiCoO 2 ; LCO) are successfully addressed by incorporating phenolphthalein polyetherketone (PEK‐C) and phenolphthalein polyethersulfone (PES‐C) as binder materials. These binders have unexpected electrochemical oxidation resistance and robustness adhesion, ensure uniform coverage on the surface of LCO, and establish an effective and fast ion‐conductive CEI/binder composite layer. By leveraging these favorable characteristics, electrodes based on polyarylether binders demonstrate significantly better cycling and rate performance than their counterparts using traditional PVDF binders. The fast ion‐conductive CEI/binder composite layer effectively mitigates adverse reactions at the cathode–electrolyte interface. As anticipated, batteries utilizing phenolphthalein polyarylether binders exhibit capacity retention rates of 88.92% and 80.4% after 200 and 500 cycles at 4.5 and 4.6 V, respectively. The application of binders, such as polyarylether binders, offers a straightforward and inspiring approach for designing high‐energy‐density battery materials.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Precision Blasting, Jianghan University, Wuhan, 430056, China.
- Key Laboratory of Optoelectronic Chemical Materials and Devices (Ministry of Education), Jianghan University, Wuhan, 430056, China.
- Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian, Liaoning, 116023, China.
ORCID-Profile: Zhihong Liu, Honghua Wang
Förderung
- National Natural Science Foundation of China
- State Key Laboratory of Precision Blasting, Jianghan University
- JHUN
- Dongfeng Moto Corporation
- Jianghan University
Zitieren
APA
Yang, K., Chen, K., Zhang, X., Gao, S., Sun, J., Gong, J., Chai, J., Zheng, Y., Liu, Z., & Wang, H. (2024). Exploring Phenolphthalein Polyarylethers as High‐Performance Alternative Binders for High‐Voltage Cathodes in Lithium‐Ion Batteries. Small, 20(43). https://doi.org/10.1002/smll.202403993
Vancouver
Yang K, Chen K, Zhang X, Gao S, Sun J, Gong J, et al. Exploring Phenolphthalein Polyarylethers as High‐Performance Alternative Binders for High‐Voltage Cathodes in Lithium‐Ion Batteries. Small. 2024;20(43). doi:10.1002/smll.202403993
BibTeX
@article{Yang2024,
author = {Yang, Kai and Chen, Keding and Zhang, Xingdi and Gao, Shuyu and Sun, Jichang and Gong, Jin and Chai, Jinchao and Zheng, Yun and Liu, Zhihong and Wang, Honghua},
title = {Exploring Phenolphthalein Polyarylethers as High‐Performance Alternative Binders for High‐Voltage Cathodes in Lithium‐Ion Batteries},
journal = {Small},
year = {2024},
volume = {20},
number = {43},
doi = {10.1002/smll.202403993}
}
EUVIMED