Carboxylic Acid-Based Hole Transport Layer with Both Anchoring and Passivation in Inverted Perovskite Solar Cells
ACS Applied Materials & Interfaces · 05.11.2026
DOI: 10.1021/acsami.6c18188 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 05.11.2026. Verfasst von Ming-Ke Cao und 11 weiteren Autor:innen. Beteiligte Einrichtung: School of Material Science & Engineering, National Experimental Demonstration Center for Materials Science and Engineering, Jiangsu Province Cultivat…. Die Arbeit nennt 70 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Research of Jiangsu Higher Education Institutions of China, State Key Laboratory of Photovoltaic Science and Technology.
Abstract (Originalsprache)
The hole transport layer (HTL) plays a pivotal role in the performance of inverted perovskite solar cells (PSCs), especially in carrier transport, anchoring to the substrate as a buried interface, and defect passivation. Novel HTLs that simultaneously achieve indium tin oxide (ITO) substrate anchoring, passivation of buried perovskite defects, and favorable interfacial energy alignment are seldom addressed. In this work, we designed a novel HTL (denoted as TPCOOH), which is functionalized with dicarboxylic acid groups in the central phenyl ring, which can anchor onto ITO substrates and passivate the top perovskite, as well as coupling with methylthio-substituted triphenylamine and thiophene units to generate suitable energy alignment and transfer the hole, realizing both passivation and anchoring effects. TPHex, as a control, had dihexyl substitution in the center. Inverted PSC devices based on TPCOOH and TPHex as hole transport layers (0.1 cm2) achieved power conversion efficiencies of 24.68% and 23.72%, respectively. The improved efficiency of TPCOOH-based devices is attributed to suppressed nonradiative recombination, rapid interfacial charge transfer, and minimal energy loss due to well-matched energy levels. These improvements are ascribed to the carboxyl groups in TPCOOH, which anchor to ITO, thus ensuring better film coverage and improved charge transport, while the passivation functionality simultaneously mitigates perovskite defects. Notably, the TPCOOH and TPHex devices retain 75% and 65% of their initial power conversion efficiencies (PCEs) after 1200 h of thermal aging at 65 ± 5 °C in a nitrogen atmosphere.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Material Science & Engineering, National Experimental Demonstration Center for Materials Science and Engineering, Jiangsu Province Cultivation Base for State Key Laboratory of Photovoltaic Science and Technolo…
- Laboratory of Advanced Optoelectronic Materials, College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou215123, China.
- Key Laboratory of Advanced Energy Materials Chemistry (Ministry of Education), Nankai University, Tianjin300071, China.
ORCID-Profile: Jing Zhang, Bo Song, Ning-Yi Yuan
Förderung
- National Natural Science Foundation of China
- Natural Science Research of Jiangsu Higher Education Institutions of China
- State Key Laboratory of Photovoltaic Science and Technology
- Scientific Research Foundation of Education Department of Anhui Province of China
- Collaborative Innovation Center of Suzhou Nano Science and Technology
- State and Local Joint Engineering Laboratory for Novel Functional Polymeric Materials, Soochow University
- Priority Academic Program Development of Jiangsu Higher Education Institutions
- Top-notch Academic Programs Project of Jiangsu Higher Education Institutions
Zitieren
APA
Cao, M. K., Li, C. Y., Tao, Y. H., Yao, J. W., Xiao, A., Ma, Z. J., Fang, X., Chen, Q. Y., Zhang, J., Zhou, Y., Song, B., & Yuan, N. Y. (2026). Carboxylic Acid-Based Hole Transport Layer with Both Anchoring and Passivation in Inverted Perovskite Solar Cells. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.6c18188
Vancouver
Cao MK, Li CY, Tao YH, Yao JW, Xiao A, Ma ZJ, et al. Carboxylic Acid-Based Hole Transport Layer with Both Anchoring and Passivation in Inverted Perovskite Solar Cells. ACS Applied Materials & Interfaces. 2026. doi:10.1021/acsami.6c18188
BibTeX
@article{Cao2026,
author = {Cao, Ming-Ke and Li, Chen-Yang and Tao, Yun-Hao and Yao, Jing-Wen and Xiao, Ao and Ma, Zi-Jun and Fang, Xiang and Chen, Qiao-Yun and Zhang, Jing and Zhou, Yi and Song, Bo and Yuan, Ning-Yi},
title = {Carboxylic Acid-Based Hole Transport Layer with Both Anchoring and Passivation in Inverted Perovskite Solar Cells},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
doi = {10.1021/acsami.6c18188}
}
EUVIMED