Nonlinear Curved Metasurfaces for Enhanced Thyroid Magnetic Resonance Imaging
ACS Applied Materials & Interfaces · 11.11.2026 · 18 (44) · 60608-60619
DOI: 10.1021/acsami.6c16968 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 02.11.2026. Verfasst von Zhiang Wang und 5 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Tribology in Advanced Equipment, Department of Mechanical Engineering, Tsinghua University, Beijing100084, China. Hauptthemen laut MEDLINE: Magnetic Resonance Imaging, Thyroid Gland. Die Arbeit nennt 43 Literaturangaben. Gefördert von: National Key Research and Development Program of China.
Abstract (Originalsprache)
Metasurfaces offer a promising approach to enhance the signal-to-noise ratio (SNR) in magnetic resonance imaging (MRI). Thyroid MRI suffers from insufficient SNR due to the anatomical irregularity of the neck and poor coil-to-tissue proximity, which fails to meet the demands of preoperative tumor diagnosis. This work introduces a nonlinear, curved metasurface tailored to address these limitations through a nonlinear mode control scheme based on up-frequency tuning. Unlike the previously reported down-frequency tuning scheme, here the metasurface's resonant frequency is selectively shifted to a frequency above the Larmor frequency during RF transmit via an integrated diode-inductor circuit, thereby minimizing B1+ perturbation and specific absorption rate increase. Concurrently, its conformal curved geometry focuses the enhanced field on the concave side, optimizing penetration for superficial targets. This adaptive mechanism minimally perturbs the transmit field while keeping the device fully active during signal reception. Experiments demonstrate that this thyroid imaging curved metasurface (TCM) provides an SNR enhancement by a factor of over six in the target thyroid region and an effective penetration depth of approximately 60 mm over the whole range of up-frequency inductances examined (27–100 nH), for which the two-fold gain is maintained to about 70 mm, validating its potential as a practical, wireless adjunct for high-quality thyroid MRI.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Tribology in Advanced Equipment, Department of Mechanical Engineering, Tsinghua University, Beijing100084, China.
- Department of Radiology, Beijing Tsinghua Changgung Hospital, School of Medicine, Tsinghua University, Beijing102218, China.
ORCID-Profile: Qian Zhao
Förderung
- National Key Research and Development Program of China
Zitieren
APA
Wang, Z., Chi, Z., Li, X., Wang, Y., Zheng, Z., & Zhao, Q. (2026). Nonlinear Curved Metasurfaces for Enhanced Thyroid Magnetic Resonance Imaging. ACS Applied Materials & Interfaces, 18(44), 60608-60619. https://doi.org/10.1021/acsami.6c16968
Vancouver
Wang Z, Chi Z, Li X, Wang Y, Zheng Z, Zhao Q. Nonlinear Curved Metasurfaces for Enhanced Thyroid Magnetic Resonance Imaging. ACS Applied Materials & Interfaces. 2026;18(44):60608-60619. doi:10.1021/acsami.6c16968
BibTeX
@article{Wang2026,
author = {Wang, Zhiang and Chi, Zhonghai and Li, Xinxin and Wang, Yakui and Zheng, Zhuozhao and Zhao, Qian},
title = {Nonlinear Curved Metasurfaces for Enhanced Thyroid Magnetic Resonance Imaging},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
volume = {18},
number = {44},
pages = {60608--60619},
doi = {10.1021/acsami.6c16968}
}
EUVIMED