Sub-Two-Micrometer Color Printing via Photochemical Deposition of Metallic Structures
ACS Applied Materials & Interfaces · 18.11.2026
DOI: 10.1021/acsami.6c16447 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 18.11.2026. Verfasst von Abdulla Al Mamun und 6 weiteren Autor:innen. Die Arbeit nennt 52 Literaturangaben. Gefördert von: National Science Foundation, National Institutes of Health.
Abstract (Originalsprache)
Additive manufacturing of metal microstructures is essential in a wide range of applications, from microelectronic circuitry to integrated photonics and biosensors, enabling prototyping production outside specially designed laboratories and eliminating the need for complex vacuum deposition and lithography systems. However, it remains a challenge to fabricate high-resolution micrometer-scale structures. In this work, we report a digital light processing-based photochemical printing technology with systematically engineered optical setup incorporating relay optics and motorized stage control for optimal focusing. This system enables printing metallic structures with a minimum feature size of 1.6 µm, or ∼0.5 µm per pixel, which is four times better compared to printing without relay optics. We further developed a model describing the relationship between bitmap layouts and digital micromirror device geometry. Guided by this model, we selectively activated individual rows of micromirrors to print gratings with linewidths below 2 µm in both horizontal and vertical orientations and elucidated the observed dependence of the structural resolution and geometry alignment on line orientations in bitmap layout design. Additionally, single-step structural multicolor images were printed in a multilayered Fabry–Pérot cavity structure through grayscale modulation in image processing, proving the feasibility of this metal printing technology in high-resolution imaging and structural production.
Förderung
- National Science Foundation
- National Institutes of Health
Zitieren
APA
Mamun, A. A., Zuo, J., Wang, D., Fasih, M., Clemens, S., Yao, Y., & Wang, C. (2026). Sub-Two-Micrometer Color Printing via Photochemical Deposition of Metallic Structures. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.6c16447
Vancouver
Mamun AA, Zuo J, Wang D, Fasih M, Clemens S, Yao Y, et al. Sub-Two-Micrometer Color Printing via Photochemical Deposition of Metallic Structures. ACS Applied Materials & Interfaces. 2026. doi:10.1021/acsami.6c16447
BibTeX
@article{Mamun2026,
author = {Mamun, Abdulla Al and Zuo, Jiawei and Wang, Dongyao and Fasih, Muhammad and Clemens, Scott and Yao, Yu and Wang, Chao},
title = {Sub-Two-Micrometer Color Printing via Photochemical Deposition of Metallic Structures},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
doi = {10.1021/acsami.6c16447}
}
EUVIMED