EUVIMEDEUVIMED entdecken
Crossref

All 3D-Printed Conducting Polymer Hydrogel-Based Soft Surface Electromyography Electrode Array for Noninvasive Fatigue Assessment

Rongtai Wan, Jie Cao, Gen Li, Yi He, Bo Zhang, Tao Lin, Baoyang Lu iD

ACS Applied Materials & Interfaces · 12.11.2026

DOI: 10.1021/acsami.6c14705 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 12.11.2026. Verfasst von Rongtai Wan und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthopedics, Qilu Hospital, Cheeloo College of Medicine, Shandong University, Qingdao, Shandong266035, P.R. China. Die Arbeit nennt 42 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Helanshan Laboratory, Jiangxi Provincial Key Laboratory of Flexible Electronics.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-density surface electromyography (sEMG) electrode arrays allow the recording of rich myoelectric signals and provide a useful approach for monitoring exercise-induced muscle fatigue. However, existing sEMG electrode arrays often suffer from mechanical mismatches between conventional rigid electrodes and soft tissues, as well as complex fabrication processes and limited programmability, which severely constrain the rational design and practical application of sEMG electrode arrays. Herein, we successfully fabricate an eight-channel PEDOT:PSS-PVA hydrogel-based soft sEMG electrode array via a multi-material 3D printing. Through systematic rheological characterization of the composite inks and rational design of a printable three-layer electrode architecture, we achieve seamless interfacial integration and integrated sequential fabrication. The as-prepared sEMG electrode array exhibits exceptional softness comparable to that of human soft tissues (Young’s modulus ∼ 10 kPa), low electrochemical impedance (∼22 Ω), and good electrochemical stability. Leveraging these advantageous properties, our sEMG electrode array enables noninvasive sEMG signal recording and monitoring of fatigue-associated sEMG changes with a high signal-to-noise ratio (SNR > 20 dB) under various grip forces before and after exercise, and captures sEMG changes associated with fatigue progression during repetitive movements. These results validate the capability of our electrode array for high-quality sEMG monitoring of fatigue-associated electrophysiological features and open up promising avenues for future applications such as scientific athletic training.

Schlagwörter

Stichwörter der Autor:innen

PEDOT:PSS-based hydrogelelectromyography monitoringmulti-material 3D printingmuscle fatigue assessmentsEMG electrode array

Autor:innen und Institutionen

  • Department of Orthopedics, Qilu Hospital, Cheeloo College of Medicine, Shandong University, Qingdao, Shandong266035, P.R. China.
  • Jiangxi Provincial Key Laboratory of Flexible Electronics, Jiangxi Science and Technology Normal University/Nanchang Jiaotong Institute, Nanchang, Jiangxi330013, P.R. China.
  • Center for X-Mechanics, Department of Engineering Mechanics, Zhejiang University, Hangzhou, Zhejiang310027, P.R. China.
  • Robotics Institute and State Key Laboratory of Mechanical System and Vibration, School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai200240, P.R. China.

ORCID-Profile: Baoyang Lu

Förderung

  • National Natural Science Foundation of China
  • Helanshan Laboratory
  • Jiangxi Provincial Key Laboratory of Flexible Electronics

Zitieren

APA

Wan, R., Cao, J., Li, G., He, Y., Zhang, B., Lin, T., & Lu, B. (2026). All 3D-Printed Conducting Polymer Hydrogel-Based Soft Surface Electromyography Electrode Array for Noninvasive Fatigue Assessment. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.6c14705

Vancouver

Wan R, Cao J, Li G, He Y, Zhang B, Lin T, et al. All 3D-Printed Conducting Polymer Hydrogel-Based Soft Surface Electromyography Electrode Array for Noninvasive Fatigue Assessment. ACS Applied Materials & Interfaces. 2026. doi:10.1021/acsami.6c14705

BibTeX
@article{Wan2026,
  author = {Wan, Rongtai and Cao, Jie and Li, Gen and He, Yi and Zhang, Bo and Lin, Tao and Lu, Baoyang},
  title = {All 3D-Printed Conducting Polymer Hydrogel-Based Soft Surface Electromyography Electrode Array for Noninvasive Fatigue Assessment},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  doi = {10.1021/acsami.6c14705}
}
Kostenlos starten →