Sequentially Stacked Graphene/Carbon Black Langmuir–Blodgett Heterostructures for Pressure-Crosstalk-Suppressed Strain Sensing
ACS Applied Materials & Interfaces · 19.08.2026 · 18 (32) · 44322-44337
DOI: 10.1021/acsami.6c11589 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 10.08.2026. Verfasst von Shaohao Wang und 9 weiteren Autor:innen. Beteiligte Einrichtung: In Situ Devices Center, School of Integrated Circuits, East China Normal University, Shanghai200241, People's Republic of China. Die Arbeit nennt 46 Literaturangaben. Gefördert von: Science and Technology Commission of Shanghai Municipality, Jiangsu Provincial Key Research and Development Program, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
Reliable resistive strain sensors require high tensile sensitivity with minimal interference from normal pressure, which remains a challenge for disordered conductive networks. Here, we report sequentially stacked graphene/carbon black (Gr/CB) Langmuir–Blodgett (LB)-like heterostructures for pressure-crosstalk-suppressed strain sensing. The films are prepared by spray-induced air-water interfacial assembly and cyclic water-assisted transfer, enabling Gr/CB deposition on elastomeric substrates. Gr layers form crack-sensitive pathways for tensile strain transduction, while CB interlayers act as distributed conductive bridges. During stretching, CB refines crack evolution and preserves percolative transport over a broad strain range. Under normal compression, CB-rich interfaces likely create additional conductive contacts, mitigating resistance fluctuations. The optimized 3L Gr/CB sensor operates up to 150% strain, with gauge factors of 15.9, 52.7, and 187.1. It retains tensile sensitivity comparable to the 3L Gr sensor while reducing the compression-induced crosstalk ratio to 3.2%. Integrated into a smart glove, the sensors improve gesture recognition accuracy from 88.0% to 98.9% and enable wireless control of a robotic hand and unmanned aerial vehicle. This work presents an interfacial stacking strategy for pressure-crosstalk-suppressed, flexible strain sensors for wearable human-machine interaction.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- In Situ Devices Center, School of Integrated Circuits, East China Normal University, Shanghai200241, People's Republic of China.
ORCID-Profile: Junhao Shen
Förderung
- Science and Technology Commission of Shanghai Municipality
- Jiangsu Provincial Key Research and Development Program
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Wang, S., Shen, J., Sun, L., Cui, J., Gan, Z., Ran, X., Li, X., Cai, C., Wu, X., & Bi, H. (2026). Sequentially Stacked Graphene/Carbon Black Langmuir–Blodgett Heterostructures for Pressure-Crosstalk-Suppressed Strain Sensing. ACS Applied Materials & Interfaces, 18(32), 44322-44337. https://doi.org/10.1021/acsami.6c11589
Vancouver
Wang S, Shen J, Sun L, Cui J, Gan Z, Ran X, et al. Sequentially Stacked Graphene/Carbon Black Langmuir–Blodgett Heterostructures for Pressure-Crosstalk-Suppressed Strain Sensing. ACS Applied Materials & Interfaces. 2026;18(32):44322-44337. doi:10.1021/acsami.6c11589
BibTeX
@article{Wang2026,
author = {Wang, Shaohao and Shen, Junhao and Sun, Leping and Cui, Jiajie and Gan, Zewen and Ran, Xu and Li, Xiaomei and Cai, Chunhua and Wu, Xing and Bi, Hengchang},
title = {Sequentially Stacked Graphene/Carbon Black Langmuir–Blodgett Heterostructures for Pressure-Crosstalk-Suppressed Strain Sensing},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
volume = {18},
number = {32},
pages = {44322--44337},
doi = {10.1021/acsami.6c11589}
}
EUVIMED