EUVIMEDOpdag EUVIMED
Crossref

Flexible Thermoelectric Belt: Enabling Recyclable Wearables for Self-Powered Gesture Recognition

Weijie Gou, Feng Yu, Xudong Lin, Xujia Liang, Jin Yang iD, Yizhe Chen, Yong Xiao, Bin Yang, Minghua Jiang, Wei Liu iD, Yonggao Yan, Jinsong Wu iD and 2 more

ACS Applied Materials & Interfaces · 2026-07-29 · 18 (29) · 39823-39833

DOI: 10.1021/acsami.6c08573 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2026-07-13. Written by Weijie Gou and 13 co-authors. Institution: State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan430070, China. 52 references. Funded by: Special Project for Research and Development in Key areas of Guangdong Province, Basic and Applied Basic Research Foundation of Guangdong Province, Hubei Provincial Regional Science and Technology Innovation Plan.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Flexible thermoelectric devices offer a promising approach for harvesting low-grade waste heat from the human body to sustainably power wearable electronics. Here, a fully flexible thermoelectric generator (f-TEG) based on a sandwich architecture is presented, utilizing high-performance n-type Bi2Te2.7Se0.3 and p-type Bi0.5Sb1.5Te3 materials as the active thermoelectric units, with liquid metal serving as the electrode. This design circumvents the need for conventional surface metallization and intricate soldering processes. To enhance the substrate’s thermal conductivity, a polydimethylsiloxane (PDMS) composite incorporating 20 wt % aluminum nitride (AlN) ceramic nanoparticles was employed for encapsulation. This approach yielded a thermal conductivity of 0.45 W m–1 K–1, approximately three times that of pure PDMS. The f-TEG devices demonstrated outstanding mechanical and electrical robustness, maintaining structural integrity and stable performance after 10,000 h of cyclic reorientation and 100,000 cycles of dynamic twisting. Moreover, both the thermoelectric materials and liquid metal could be nondestructively recovered and reused via simple mechanical peeling. As a proof of concept, the f-TEG units were monolithically integrated into a wearable belt. Powered solely by body heat at an ambient temperature of 25 °C, the integrated system stably delivered an output voltage of 180.6 mV. By incorporating a lightweight depthwise separable GRU network (DSGNet, 11.95 kB) that synergistically models features through depthwise separable convolutions and gated recurrent units, a posture recognition accuracy of 98.96% was achieved. This work establishes a feasible technological pathway toward constructing self-powered, intelligent human body protection systems that simultaneously offer long operational lifetime and facile manufacturability.

Subjects

Author keywords

deep learningflexible thermoelectric generatorliquid metalposture recognitionthermal conductivity

Authors and institutions

  • State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan430070, China.
  • Hubei Longzhong Laboratory, Wuhan University of Technology Xiangyang Demonstration ZoneXiangyang441000, China.
  • School of Computer Science and Artificial Intelligence, Wuhan Textile University, Wuhan430200, China.
  • School of Civil Engineering, Architecture and Environment, Hubei University of Technology, Wuhan430068, China.
  • State Key Laboratory of Light Superalloys, Wuhan University of Technology, Wuhan430070, China.
  • School of Materials Science and Engineering, Wuhan University of Technology, Wuhan430070, China.

ORCID profiles: Jin Yang, Wei Liu, Jinsong Wu, Xinfeng Tang, Dongwang Yang

Funding

  • Special Project for Research and Development in Key areas of Guangdong Province
  • Basic and Applied Basic Research Foundation of Guangdong Province
  • Hubei Provincial Regional Science and Technology Innovation Plan

Cite

APA

Gou, W., Yu, F., Lin, X., Liang, X., Yang, J., Chen, Y., Xiao, Y., Yang, B., Jiang, M., Liu, W., Yan, Y., Wu, J., Tang, X., & Yang, D. (2026). Flexible Thermoelectric Belt: Enabling Recyclable Wearables for Self-Powered Gesture Recognition. ACS Applied Materials & Interfaces, 18(29), 39823-39833. https://doi.org/10.1021/acsami.6c08573

Vancouver

Gou W, Yu F, Lin X, Liang X, Yang J, Chen Y, et al. Flexible Thermoelectric Belt: Enabling Recyclable Wearables for Self-Powered Gesture Recognition. ACS Applied Materials & Interfaces. 2026;18(29):39823-39833. doi:10.1021/acsami.6c08573

BibTeX
@article{Gou2026,
  author = {Gou, Weijie and Yu, Feng and Lin, Xudong and Liang, Xujia and Yang, Jin and Chen, Yizhe and Xiao, Yong and Yang, Bin and Jiang, Minghua and Liu, Wei and Yan, Yonggao and Wu, Jinsong and Tang, Xinfeng and Yang, Dongwang},
  title = {Flexible Thermoelectric Belt: Enabling Recyclable Wearables for Self-Powered Gesture Recognition},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  volume = {18},
  number = {29},
  pages = {39823--39833},
  doi = {10.1021/acsami.6c08573}
}
Start for free →