EUVIMEDOpdag EUVIMED
Crossref

Achieving a High Average Thermoelectric Figure of Merit ( ZT) in Medium-Entropy SnTe Alloys

Wenqi Zheng, Dan Feng, Mingrui Zhang, Mengqi Li, Weishuai Wang, Fudong Zhang, Zupei Yang iD, Di Wu iD

ACS Applied Materials & Interfaces · 2026-06-24 · 18 (24) · 34074-34083

DOI: 10.1021/acsami.6c07948 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2026-06-10. Written by Wenqi Zheng and 7 co-authors. Institution: Key Laboratory for Macromolecular Science of Shaanxi Province and Shaanxi Key Laboratory for Advanced Energy Devices, School of Materials and Enginee…. Cited 1 times so far (Crossref); 52 references. Funded by: Fundamental Research Funds for the Central Universities, National Natural Science Foundation of China, Fundamental Innovation Project in School of Materials Science and Engineering.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Entropy engineering is becoming a crucial strategy for enhancing the performance of thermoelectric materials, as increasing configurational entropy can influence the phase structure and localized microstructure profoundly. SnTe, as a lead-free alternative to PbTe, has drawn intensive attention for decades. Despite the outstanding maximal figures of merit have been reported in SnTe-based alloys, the average figure of merit across the working temperature range still stays at quite a low level as compared to PbTe-based materials. In this work, based on the SnTe-based Sn1-xGexTe solid solution, we increased its configurational entropy to the medium-entropy range (1.0R < ΔS < 1.5 R) by Sb2Te3 alloying and Pb doping. Increasing configurational entropy substantially enlarged the effective mass of charge carriers while significantly reducing the lattice thermal conductivity, thereby realizing effective decoupling between electrical and thermal transports. As a result, we achieved a maximal ZT value of 1.31 at 723 K with an impressively high average ZT value of 0.89 across 323-773 K in the sample (Sn0.5Ge0.425Pb0.075Te)10Sb2Te3. This work offers a generalizable methodology for designing high-performance thermoelectric materials.

Subjects

Author keywords

SnTeentropy engineeringlattice thermal conductivity, electron−phonon decouplingthermoelectric

Authors and institutions

  • Key Laboratory for Macromolecular Science of Shaanxi Province and Shaanxi Key Laboratory for Advanced Energy Devices, School of Materials and Engineering, Shaanxi Normal University, Xi'an 710062, China.
  • Analytical & Testing Center, Northwestern Polytechnical University, Xi'an 710072, China.

ORCID profiles: Zupei Yang, Di Wu

Funding

  • Fundamental Research Funds for the Central Universities
  • National Natural Science Foundation of China
  • Fundamental Innovation Project in School of Materials Science and Engineering

Cite

APA

Zheng, W., Feng, D., Zhang, M., Li, M., Wang, W., Zhang, F., Yang, Z., & Wu, D. (2026). Achieving a High Average Thermoelectric Figure of Merit ( ZT) in Medium-Entropy SnTe Alloys. ACS Applied Materials & Interfaces, 18(24), 34074-34083. https://doi.org/10.1021/acsami.6c07948

Vancouver

Zheng W, Feng D, Zhang M, Li M, Wang W, Zhang F, et al. Achieving a High Average Thermoelectric Figure of Merit ( ZT) in Medium-Entropy SnTe Alloys. ACS Applied Materials & Interfaces. 2026;18(24):34074-34083. doi:10.1021/acsami.6c07948

BibTeX
@article{Zheng2026,
  author = {Zheng, Wenqi and Feng, Dan and Zhang, Mingrui and Li, Mengqi and Wang, Weishuai and Zhang, Fudong and Yang, Zupei and Wu, Di},
  title = {Achieving a High Average Thermoelectric Figure of Merit ( ZT) in Medium-Entropy SnTe Alloys},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  volume = {18},
  number = {24},
  pages = {34074--34083},
  doi = {10.1021/acsami.6c07948}
}
Start for free →