Synergistic Stabilization and Defect Passivation of CsPbI 3 Perovskite Solar Cells Enabled by an In Situ Polymerized Network
ACS Applied Materials & Interfaces · 2026-04-29 · 18 (16) · 23239-23250
DOI: 10.1021/acsami.6c02481 ↗At a glance
Journal article in ACS Applied Materials & Interfaces, published online on 2026-04-15. Written by Jiyuan Wu and 5 co-authors. Institution: Key Laboratory of Advanced Light Conversion Materials and Biophotonics, School of Chemistry and Life Resources, Renmin University of China, Beijing 1…. Cited 1 times so far (Crossref); 58 references. Funded by: Natural Science Basic Research Program of Shaanxi Province, National Natural Science Foundation of China.
Abstract (original language)
CsPbI3 perovskite has emerged as a promising material for photovoltaic applications owing to its thermal stability and near-ideal bandgap. However, its tendency to transition from photoactive black phase to yellow phase and the processing-induced defects pose significant challenges to its photovoltaic performance. In this study, we propose an innovative in situ polymerization strategy to overcome these limitations by incorporating a multifunctional polymer into CsPbI3 perovskite films. Specifically, 2,2,3,4,4,4-hexafluorobutyl acrylate monomers are employed to modify the perovskite film surface, where they undergo in situ polymerization during thermal annealing to form an integrated protective network. The resulting polymer modifier exhibits multiple synergistic functions: the carbonyl groups passivate undercoordinated Pb2+ defects and the -CFH- groups interact with I- species to suppress ion migration, while the hydrophobic fluorinated chains enhance moisture resistance. Furthermore, the existence of the polymer could increase the steric hindrance of octahedral distortion to enhance the stability of black-phase CsPbI3. Notably, the polymer-modified perovskite exhibits improved film quality with reduced defects, which facilitates efficient charge transport and extraction. As a result, the optimized CsPbI3 perovskite solar cells achieve a power conversion efficiency of 15.23%, along with substantially improved storage stability. Meanwhile, this polymer-modification strategy effectively mitigates lead leakage, providing a valuable route toward more environmentally friendly CsPbI3 perovskite solar cells.
Subjects
Author keywords
Authors and institutions
- Key Laboratory of Advanced Light Conversion Materials and Biophotonics, School of Chemistry and Life Resources, Renmin University of China, Beijing 100872, China.
- School of Materials Engineering, Xihang University, Xi'an, Shaanxi 710077, China.
ORCID profiles: Yiyi Li, Yujun Qin, Xi-Cheng Ai, Yi Wang
Funding
- Natural Science Basic Research Program of Shaanxi Province
- National Natural Science Foundation of China
Cite
APA
Wu, J., Li, Y., Qin, Y., Yu, M., Ai, X. C., & Wang, Y. (2026). Synergistic Stabilization and Defect Passivation of CsPbI 3 Perovskite Solar Cells Enabled by an In Situ Polymerized Network. ACS Applied Materials & Interfaces, 18(16), 23239-23250. https://doi.org/10.1021/acsami.6c02481
Vancouver
Wu J, Li Y, Qin Y, Yu M, Ai XC, Wang Y. Synergistic Stabilization and Defect Passivation of CsPbI 3 Perovskite Solar Cells Enabled by an In Situ Polymerized Network. ACS Applied Materials & Interfaces. 2026;18(16):23239-23250. doi:10.1021/acsami.6c02481
BibTeX
@article{Wu2026,
author = {Wu, Jiyuan and Li, Yiyi and Qin, Yujun and Yu, Man and Ai, Xi-Cheng and Wang, Yi},
title = {Synergistic Stabilization and Defect Passivation of CsPbI 3 Perovskite Solar Cells Enabled by an In Situ Polymerized Network},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
volume = {18},
number = {16},
pages = {23239--23250},
doi = {10.1021/acsami.6c02481}
}
EUVIMED