Epitaxial Entropy-Assisted Surface Engineering toward Durable High-Voltage O3-Type Layered Oxide Cathodes for Sodium-Ion Batteries
ACS Applied Materials & Interfaces · 2026-05-13 · 18 (18) · 26210-26219
DOI: 10.1021/acsami.6c01246 ↗At a glance
Journal article in ACS Applied Materials & Interfaces, published online on 2026-04-29. Written by Kemeng Wang and 6 co-authors. Institution: School of Chemistry and Chemical Engineering, Guangxi University, Nanning 530004, China. Cited 2 times so far (Crossref); 43 references. Funded by: National Natural Science Foundation of China, Chongzuo Science and Technology Plan Project of China.
Abstract (original language)
Surface structural instability and related side reactions are widely acknowledged as the primary factors leading to the failure of layered oxide cathodes during extended high-voltage cycling of sodium-ion batteries (SIBs). In this study, we propose an epitaxial entropy-assisted surface engineering strategy that integrates dual-site W/B surface doping with an in situ formed Na2WO4 protective coating layer to enhance the high-voltage cycling performance of the O3-type Na0.9Ni0.33Mn0.40Cu0.12Ti0.15O2 (NMCT). Tungsten and boron, selected for their high electronegativity, occupy octahedral and tetrahedral surface sites, respectively, which increases local configurational entropy. This codoping effectively anchors lattice oxygen at the surface, improves phase transition reversibility, and mitigates structural degradation that propagates from the surface into the bulk during high-voltage cycling. The Na2WO4 layer suppresses electrolyte decomposition while promoting efficient Na+ transport. As a result, WB-modified NMCT exhibits significantly enhanced cycling stability (79.7% capacity retention after 200 cycles at 100 mA g-1) and rate capability (95.1 mAh g-1 at 2000 mA g-1) at an upper cutoff voltage of 4.3 V, outperforming pristine NMCT (60% retention and 77.1 mAh g-1). This work offers an effective approach to rationally reconstruct the surface of layered oxide cathodes, thereby overcoming the upper cutoff voltage constraint for high-performance SIBs.
Subjects
Author keywords
Authors and institutions
- School of Chemistry and Chemical Engineering, Guangxi University, Nanning 530004, China.
- Guangxi Key Laboratory for High-value Utilization of Manganese Resources, College of Chemistry and Materials, Guangxi Minzu Normal University, Chongzuo 532200, China.
ORCID profiles: Yingying Huang, Xuehang Wu
Funding
- National Natural Science Foundation of China
- Chongzuo Science and Technology Plan Project of China
Cite
APA
Wang, K., Chen, Y., Li, K., Li, S., Wu, W., Huang, Y., & Wu, X. (2026). Epitaxial Entropy-Assisted Surface Engineering toward Durable High-Voltage O3-Type Layered Oxide Cathodes for Sodium-Ion Batteries. ACS Applied Materials & Interfaces, 18(18), 26210-26219. https://doi.org/10.1021/acsami.6c01246
Vancouver
Wang K, Chen Y, Li K, Li S, Wu W, Huang Y, et al. Epitaxial Entropy-Assisted Surface Engineering toward Durable High-Voltage O3-Type Layered Oxide Cathodes for Sodium-Ion Batteries. ACS Applied Materials & Interfaces. 2026;18(18):26210-26219. doi:10.1021/acsami.6c01246
BibTeX
@article{Wang2026,
author = {Wang, Kemeng and Chen, Yuyu and Li, Kunpeng and Li, Shijie and Wu, Wenwei and Huang, Yingying and Wu, Xuehang},
title = {Epitaxial Entropy-Assisted Surface Engineering toward Durable High-Voltage O3-Type Layered Oxide Cathodes for Sodium-Ion Batteries},
journal = {ACS Applied Materials & Interfaces},
year = {2026},
volume = {18},
number = {18},
pages = {26210--26219},
doi = {10.1021/acsami.6c01246}
}
EUVIMED