EUVIMEDObjevte EUVIMED
Crossref

Enhancement of Electrical Stability and Mechanical Properties of Cu 2 Se through CuCrSe 2 as a Copper Ion Reservoir

Chenyang Xiao, Zhongtao Lu, Luoqi Wu, Bo Duan iD, Xiaobin Feng, Ling Zhou iD, Pengcheng Zhai, Guodong Li iD, Qingjie Zhang

ACS Applied Materials & Interfaces · 2026-04-29 · 18 (16) · 23376-23387

DOI: 10.1021/acsami.6c01010 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2026-04-17. Written by Chenyang Xiao and 8 co-authors. Institution: Hubei Key Laboratory of Theory and Application of Advanced Materials Mechanics, Wuhan University of Technology, Wuhan 430070, China. 53 references. Funded by: State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Fundamental Research Funds for the Central Universities, National Natural Science Foundation of China.

AbstraktSubjectsBibliografické údajeCiteRelated studies

Abstract (original language)

Cu2Se exhibits an ultralow lattice thermal conductivity owing to its high mobility of Cu+ ions. However, irreversible Cu precipitation at high current densities undermines its electrical stability. In this work, by incorporating the superionic conductor CuCrSe2 into the Cu2Se matrix, both the electrical stability and the mechanical properties are significantly enhanced. Variable-temperature X-ray diffraction (XRD) and first-principles calculations reveal that the solubility of Cu+ ions in CuCrSe2 varies with the temperature, enabling this composite phase to function as a dynamic Cu+ ion reservoir. The Cu+ ion concentration gradient and the built-in electric field at the Cu2Se/CuCrSe2 interface drive the reversible intercalation of Cu+ ions into CuCrSe2, increasing Cu vacancies in Cu2Se and lowering the Cu+ ion chemical potential, thus significantly improving the electrical stability. The resultant composite maintains a ZT value of 1.5 over multiple test cycles. Furthermore, the increased grain boundaries and composite interfaces inhibit dislocation movement, increasing the compressive strength to 312 MPa for the composite (a 142% improvement relative to Cu2Se). Our findings provide a strategy for the development of electrically stable superionic thermoelectric devices.

Subjects

Author keywords

Cu+ ion reservoirCu2Secomposite interfaceelectrical stabilitymechanical properties

Authors and institutions

  • Hubei Key Laboratory of Theory and Application of Advanced Materials Mechanics, Wuhan University of Technology, Wuhan 430070, China.
  • State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, China.

ORCID profiles: Bo Duan, Ling Zhou, Guodong Li

Funding

  • State Key Laboratory of Advanced Technology for Materials Synthesis and Processing
  • Fundamental Research Funds for the Central Universities
  • National Natural Science Foundation of China

Cite

APA

Xiao, C., Lu, Z., Wu, L., Duan, B., Feng, X., Zhou, L., Zhai, P., Li, G., & Zhang, Q. (2026). Enhancement of Electrical Stability and Mechanical Properties of Cu 2 Se through CuCrSe 2 as a Copper Ion Reservoir. ACS Applied Materials & Interfaces, 18(16), 23376-23387. https://doi.org/10.1021/acsami.6c01010

Vancouver

Xiao C, Lu Z, Wu L, Duan B, Feng X, Zhou L, et al. Enhancement of Electrical Stability and Mechanical Properties of Cu 2 Se through CuCrSe 2 as a Copper Ion Reservoir. ACS Applied Materials & Interfaces. 2026;18(16):23376-23387. doi:10.1021/acsami.6c01010

BibTeX
@article{Xiao2026,
  author = {Xiao, Chenyang and Lu, Zhongtao and Wu, Luoqi and Duan, Bo and Feng, Xiaobin and Zhou, Ling and Zhai, Pengcheng and Li, Guodong and Zhang, Qingjie},
  title = {Enhancement of Electrical Stability and Mechanical Properties of Cu 2 Se through CuCrSe 2 as a Copper Ion Reservoir},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  volume = {18},
  number = {16},
  pages = {23376--23387},
  doi = {10.1021/acsami.6c01010}
}
Start for free →