EUVIMEDObjevte EUVIMED
Crossref

Fabrication of 3D-Printed Adhesive Microneedle Patch Loaded with Codoped Hydroxyapatite in Deep-Tissue Infective Wound Healing

Anjali Upadhyay, Debarati Kayal, Snehasish Mandal, Shikha Tripathi, Avanish Singh Parmar, Kundan Kumar, Sudip Mukherjee iD

ACS Applied Materials & Interfaces · 2026

DOI: 10.1021/acsami.6c00909 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, 2026. Written by Anjali Upadhyay and 6 co-authors. Institution: School of Biomedical Engineering, Indian Institute of Technology (BHU), Varanasi, Uttar Pradesh 221005, India. Major MEDLINE topics: Wound Healing, Durapatite, Anti-Bacterial Agents, Printing, Three-Dimensional. Cited 5 times so far (Crossref); 58 references. Funded by: Council of Scientific and Industrial Research, India, University Grants Commission, Department of Biotechnology, Ministry of Science and Technology, India.

AbstraktSubjectsBibliografické údajeCiteRelated studies

Abstract (original language)

Deep-tissue wounds are challenging to heal due to improper delivery of therapeutic agents to damaged tissues and muscles. Recent developments in deep-tissue penetrating microneedle patches (MNPs) have made significant progress. However, currently marketed systems lack (a) innovative therapeutics influencing all four stages of wound healing; (b) adhesiveness of the designed patch; and (c) the use of natural biomaterials with inherent bioactive properties. Recent developments in hydroxyapatite (HAP) have significantly expanded its possibilities in tissue regenerative applications due to its inherent biological properties. In this study, three hexagonal hydroxyapatite (HAP) codoped with cerium (Ce) and magnesium (Mg) at varying concentrations (2% = 1Ce-1Mg, 5% = 2.5Ce-2.5Mg, and 10% = 5Ce-5Mg) and 2 control groups doped only with Ce (2.5Ce HAP) and Mg (2.5Mg HAP) were synthesized. Following various in vitro tests, the 2.5Ce-2.5Mg codoped HAP was identified as a lead due to its minimal cytotoxicity and maximum in vitro antibacterial activity. Digital light processing (DLP) 3D printing was utilized to fabricate an adhesive microneedle patch (MNP) incorporated with the 2.5Ce-2.5Mg codoped HAP (MNP+2.5Ce-2.5Mg HAP), which facilitated rapid liver hemostasis and repair of skin wound healing within 12 days in an in vivo infective rat model. MNP+2.5Ce-2.5Mg HAP has strong potential for clinical translation in the rapid repair of chronic wounds.

Subjects

MeSH terms (MEDLINE)

Wound HealingDurapatiteAnti-Bacterial AgentsPrinting, Three-DimensionalAnimalsRatsMicroneedle Drug DeliveryMaleCeriumNeedlesMagnesiumBiocompatible Materials

Author keywords

3D bioprintingantibacterial activitycerium−magnesium codopinghydroxyapatiteinfective wound healingmicroneedle patch

Substances

DurapatiteAnti-Bacterial AgentsCeriumMagnesiumBiocompatible Materials

Authors and institutions

  • School of Biomedical Engineering, Indian Institute of Technology (BHU), Varanasi, Uttar Pradesh 221005, India.
  • Department of Physics, Indian Institute of Technology (BHU), Varanasi, Uttar Pradesh 221005, India.
  • Department of Ceramic Engineering, Indian Institute of Technology (BHU), Varanasi, Uttar Pradesh 221005, India.

ORCID profiles: Sudip Mukherjee

Funding

  • Council of Scientific and Industrial Research, India
  • University Grants Commission
  • Department of Biotechnology, Ministry of Science and Technology, India
  • Indian Institute of Technology (BHU) Varanasi

Cite

APA

Upadhyay, A., Kayal, D., Mandal, S., Tripathi, S., Parmar, A. S., Kumar, K., & Mukherjee, S. (2026). Fabrication of 3D-Printed Adhesive Microneedle Patch Loaded with Codoped Hydroxyapatite in Deep-Tissue Infective Wound Healing. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.6c00909

Vancouver

Upadhyay A, Kayal D, Mandal S, Tripathi S, Parmar AS, Kumar K, et al. Fabrication of 3D-Printed Adhesive Microneedle Patch Loaded with Codoped Hydroxyapatite in Deep-Tissue Infective Wound Healing. ACS Applied Materials & Interfaces. 2026. doi:10.1021/acsami.6c00909

BibTeX
@article{Upadhyay2026,
  author = {Upadhyay, Anjali and Kayal, Debarati and Mandal, Snehasish and Tripathi, Shikha and Parmar, Avanish Singh and Kumar, Kundan and Mukherjee, Sudip},
  title = {Fabrication of 3D-Printed Adhesive Microneedle Patch Loaded with Codoped Hydroxyapatite in Deep-Tissue Infective Wound Healing},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  doi = {10.1021/acsami.6c00909}
}
Start for free →