EUVIMEDScopri EUVIMED
Crossref

Contour-Regulated Microfabrication of Metallic Honeycomb-like Structures via Ultrafast-Laser-Ablation-Designated Chemical Etching

Ziyan Song iD, Zhixuan Chang, Zhao Liu, Lizhong Wang, Daizhou Li iD, Guotai Chen, Hongjun Zhang, Minlin Zhong iD, Peixun Fan iD

ACS Applied Materials & Interfaces · 2026-04-01 · 18 (12) · 18525-18536

DOI: 10.1021/acsami.6c00534 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2026-03-18. Written by Ziyan Song and 8 co-authors. Institution: Laser Materials Processing Research Center, Key Laboratory for Advanced Materials Processing Technology (Ministry of Education), School of Materials …. Cited 1 times so far (Crossref); 41 references. Funded by: Tsinghua University, National Basic Research Program of China (973 Program), National Natural Science Foundation of China (NSFC).

AbstractSubjectsDati bibliograficiCiteRelated studies

Abstract (original language)

The hybrid of ultrafast laser ablation and chemical treatment for achieving high-precision modulation of surface micro/nano structural contours has been a research focus in the micro/nanofabrication field and facilitated various applications. However, current hybrid approaches primarily target dielectric or nonmetallic materials, and the precise control over both micro/nano structural qualities and contours on metal surfaces remains an unresolved challenge. Herein, we report a contour-regulated microfabrication method via ultrafast-laser-ablation-designated chemical etching for controlled preparation of various micro/nanostructures on metal surfaces. Specifically, two-way effects are realized, i.e., the ultrafast laser-made micro/nanostructures can guide the wet-chemical etching, and the wet-chemical etching can modulate the ultrafast laser-made micro/nanostructures, via the modified chemical reactivities at different structure locations. The contour-regulated microfabrication method enables the reshaping of micropatterns on metal surfaces from irregular elliptical microunits to circular and even hexagonal ones in a controlled manner, with both the structure qualities improved and structure contours modulated within one process. The contour-regulated microfabrication method has flexible adaptivity for treating various patterns and structures fabricated by ultrafast laser, even for parallel reshaping of ultrafast laser-made precursor structures with varying layouts. As a demonstration of surface function control, closely packed honeycomb-like structures with uniform geometries are produced, exhibiting excellent superhydrophobic and icephobic performances, with steady low ice-adhesion strength

Subjects

Author keywords

anti-icingcontour-regulated microfabricationmicro/nanoscale surface patterningultrafast laserwet-chemical etching

Authors and institutions

  • Laser Materials Processing Research Center, Key Laboratory for Advanced Materials Processing Technology (Ministry of Education), School of Materials Science and Engineering, Tsinghua University, Beijing 100084, P. R. Ch…

ORCID profiles: Ziyan Song, Daizhou Li, Minlin Zhong, Peixun Fan

Funding

  • Tsinghua University
  • National Basic Research Program of China (973 Program)
  • National Natural Science Foundation of China (NSFC)

Cite

APA

Song, Z., Chang, Z., Liu, Z., Wang, L., Li, D., Chen, G., Zhang, H., Zhong, M., & Fan, P. (2026). Contour-Regulated Microfabrication of Metallic Honeycomb-like Structures via Ultrafast-Laser-Ablation-Designated Chemical Etching. ACS Applied Materials & Interfaces, 18(12), 18525-18536. https://doi.org/10.1021/acsami.6c00534

Vancouver

Song Z, Chang Z, Liu Z, Wang L, Li D, Chen G, et al. Contour-Regulated Microfabrication of Metallic Honeycomb-like Structures via Ultrafast-Laser-Ablation-Designated Chemical Etching. ACS Applied Materials & Interfaces. 2026;18(12):18525-18536. doi:10.1021/acsami.6c00534

BibTeX
@article{Song2026,
  author = {Song, Ziyan and Chang, Zhixuan and Liu, Zhao and Wang, Lizhong and Li, Daizhou and Chen, Guotai and Zhang, Hongjun and Zhong, Minlin and Fan, Peixun},
  title = {Contour-Regulated Microfabrication of Metallic Honeycomb-like Structures via Ultrafast-Laser-Ablation-Designated Chemical Etching},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  volume = {18},
  number = {12},
  pages = {18525--18536},
  doi = {10.1021/acsami.6c00534}
}
Start for free →