EUVIMEDOpdag EUVIMED
Crossref

Thermally Induced Interfacial Changes of Solid Polymer Electrolytes in Electric Double-Layer Supercapacitors

Parya Teymoory iD, Caiwei Shen iD

ACS Applied Materials & Interfaces · 2026-01-28 · 18 (3) · 6210-6222

DOI: 10.1021/acsami.5c22271 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2026-01-19. Written by Parya Teymoory and 1 co-authors. Institution: Mechanical Engineering Department, University of Massachusetts Dartmouth, Dartmouth, Massachusetts 02747, United States. Cited 4 times so far (Crossref); 76 references. Funded by: Office of Naval Research Global, Division of Civil, Mechanical and Manufacturing Innovation, University of Massachusetts Dartmouth.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

All-solid-state supercapacitors are promising candidates for energy storage in flexible electronics and multifunctional structural components. However, when solid polymer electrolytes (SPEs) replace liquid electrolytes, capacitance drops dramatically, limiting the achievable energy density of these devices. Prior research has largely focused on enhancing ionic conductivity, while the role of the electrode-electrolyte interface remains underexplored and may represent the dominant performance bottleneck. We investigated PEO, PLA, and PMMA-based SPEs (each with 20 wt % lithium salt) under identical controlled thermal histories to assess the impact of morphology and interfacial contact on electrochemical performance. Temperature-dependent ionic conductivity measurements show that PLA exhibits the lowest conductivity, PEO the highest, and PMMA intermediate, following Arrhenius-type behavior. Despite its lower conductivity relative to PEO, PMMA maintains a smooth, amorphous interface, resulting in stable interfacial capacitance, whereas crystalline PEO and PLA undergo crystallization, producing ordered structure and capacitance decay. All as-cast films showed rough surfaces and poor contact with gold electrodes (

Subjects

Author keywords

electric double-layer capacitanceelectrochemical performanceinterfacial propertiessolid polymer electrolytesupercapacitors

Authors and institutions

  • Mechanical Engineering Department, University of Massachusetts Dartmouth, Dartmouth, Massachusetts 02747, United States.

ORCID profiles: Parya Teymoory, Caiwei Shen

Funding

  • Office of Naval Research Global
  • Division of Civil, Mechanical and Manufacturing Innovation
  • University of Massachusetts Dartmouth

Cite

APA

Teymoory, P., & Shen, C. (2026). Thermally Induced Interfacial Changes of Solid Polymer Electrolytes in Electric Double-Layer Supercapacitors. ACS Applied Materials & Interfaces, 18(3), 6210-6222. https://doi.org/10.1021/acsami.5c22271

Vancouver

Teymoory P, Shen C. Thermally Induced Interfacial Changes of Solid Polymer Electrolytes in Electric Double-Layer Supercapacitors. ACS Applied Materials & Interfaces. 2026;18(3):6210-6222. doi:10.1021/acsami.5c22271

BibTeX
@article{Teymoory2026,
  author = {Teymoory, Parya and Shen, Caiwei},
  title = {Thermally Induced Interfacial Changes of Solid Polymer Electrolytes in Electric Double-Layer Supercapacitors},
  journal = {ACS Applied Materials & Interfaces},
  year = {2026},
  volume = {18},
  number = {3},
  pages = {6210--6222},
  doi = {10.1021/acsami.5c22271}
}
Start for free →