EUVIMEDOpdag EUVIMED
Crossref

Niobium-Doped Ultrahigh-Ni Single-Crystalline LiNi 0.95 Co 0.025 Mn 0.025 O 2 Cathode Enabled by the Molten Salt Method for High-Energy Lithium-Ion Batteries

Dawei Xu, Xing Zhou iD, Dongwei He, Xiaowei Liu, Chao Yang, Jin Han iD, Tiefeng Liu iD, Ya You iD

ACS Applied Materials & Interfaces · 2025-11-26 · 17 (47) · 64514-64522

DOI: 10.1021/acsami.5c17045 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2025-11-14. Written by Dawei Xu and 7 co-authors. Institution: State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, Hubei 430070, China. Cited 7 times so far (Crossref); 45 references. Funded by: China Association for Science and Technology, National Key Research and Development Program of China, Fundamental Research Funds for the Central Universities.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Growing demand for high-energy-density lithium-ion batteries (LIBs) has established high-nickel layered oxides as one of the most promising cathode candidates. Compared with commonly used high-nickel polycrystalline layered oxides, high-nickel single-crystalline layered oxides have attracted more attention due to their improved structural and cycling stability. However, the synthesis of high-nickel single-crystalline nickel cobalt manganese lithium oxide (NCM) particles requires a high calcination temperature, leading to particle agglomeration and aggravated Li+/Ni2+ cation mixing. In addition, high-nickel single-crystalline NCM could suffer from sluggish Li+ diffusion kinetics and structural degradation caused by severe phase transformation. Herein, we adopted the molten salt method to prepare a single-crystalline LiNi0.95Co0.025Mn0.025O2 cathode at a relatively low synthesis temperature to relieve particle agglomeration. Meanwhile, the Nb doping strategy is employed to broaden the interplanar spacing to facilitate Li+ diffusion, inhibit the Li+/Ni2+ cation mixing, and restrain the severe phase transformation. The obtained Nb-doped single-crystalline LiNi0.95Co0.025Mn0.025O2 (SC-NCM-N) cathode achieves a high reversible capacity of 216.4 mAh g-1 at 0.1 C (1 C = 180 mAh g-1), along with an improved capacity retention (88.7% after 100 cycles at 1 C) in comparison with the polycrystalline LiNi0.95Co0.025Mn0.025O2 (P-NCM, 66.8%) and pristine single-crystalline LiNi0.95Co0.025Mn0.025O2 (SC-NCM, 79.1%). This work offers insights into developing high-nickel single-crystalline cathodes for high-energy-density LIBs.

Subjects

Author keywords

lithium-ion batteriesmolten salt methodniobium dopantsingle-crystallineultrahigh-nickel layered cathode

Authors and institutions

  • State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, Hubei 430070, China.
  • International School of Materials Science and Engineering, School of Materials Science and Microelectronics, Wuhan University of Technology, Wuhan, Hubei 430070, China.
  • College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, Zhejiang 310058, China.
  • Quzhou Institute of Power Battery and Grid Energy Storage, Quzhou, Zhejiang 324000, China.

ORCID profiles: Xing Zhou, Jin Han, Tiefeng Liu, Ya You

Funding

  • China Association for Science and Technology
  • National Key Research and Development Program of China
  • Fundamental Research Funds for the Central Universities
  • National Natural Science Foundation of China

Cite

APA

Xu, D., Zhou, X., He, D., Liu, X., Yang, C., Han, J., Liu, T., & You, Y. (2025). Niobium-Doped Ultrahigh-Ni Single-Crystalline LiNi 0.95 Co 0.025 Mn 0.025 O 2 Cathode Enabled by the Molten Salt Method for High-Energy Lithium-Ion Batteries. ACS Applied Materials & Interfaces, 17(47), 64514-64522. https://doi.org/10.1021/acsami.5c17045

Vancouver

Xu D, Zhou X, He D, Liu X, Yang C, Han J, et al. Niobium-Doped Ultrahigh-Ni Single-Crystalline LiNi 0.95 Co 0.025 Mn 0.025 O 2 Cathode Enabled by the Molten Salt Method for High-Energy Lithium-Ion Batteries. ACS Applied Materials & Interfaces. 2025;17(47):64514-64522. doi:10.1021/acsami.5c17045

BibTeX
@article{Xu2025,
  author = {Xu, Dawei and Zhou, Xing and He, Dongwei and Liu, Xiaowei and Yang, Chao and Han, Jin and Liu, Tiefeng and You, Ya},
  title = {Niobium-Doped Ultrahigh-Ni Single-Crystalline LiNi 0.95 Co 0.025 Mn 0.025 O 2 Cathode Enabled by the Molten Salt Method for High-Energy Lithium-Ion Batteries},
  journal = {ACS Applied Materials & Interfaces},
  year = {2025},
  volume = {17},
  number = {47},
  pages = {64514--64522},
  doi = {10.1021/acsami.5c17045}
}
Start for free →