EUVIMEDEUVIMED entdecken
Crossref

Niobium-Doped Ultrahigh-Ni Single-Crystalline LiNi 0.95 Co 0.025 Mn 0.025 O 2 Cathode Enabled by the Molten Salt Method for High-Energy Lithium-Ion Batteries

Dawei Xu, Xing Zhou iD, Dongwei He, Xiaowei Liu, Chao Yang, Jin Han iD, Tiefeng Liu iD, Ya You iD

ACS Applied Materials & Interfaces · 26.11.2025 · 17 (47) · 64514-64522

DOI: 10.1021/acsami.5c17045 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 14.11.2025. Verfasst von Dawei Xu und 7 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, Hubei 430070, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 45 Literaturangaben. Gefördert von: China Association for Science and Technology, National Key Research and Development Program of China, Fundamental Research Funds for the Central Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Growing demand for high-energy-density lithium-ion batteries (LIBs) has established high-nickel layered oxides as one of the most promising cathode candidates. Compared with commonly used high-nickel polycrystalline layered oxides, high-nickel single-crystalline layered oxides have attracted more attention due to their improved structural and cycling stability. However, the synthesis of high-nickel single-crystalline nickel cobalt manganese lithium oxide (NCM) particles requires a high calcination temperature, leading to particle agglomeration and aggravated Li+/Ni2+ cation mixing. In addition, high-nickel single-crystalline NCM could suffer from sluggish Li+ diffusion kinetics and structural degradation caused by severe phase transformation. Herein, we adopted the molten salt method to prepare a single-crystalline LiNi0.95Co0.025Mn0.025O2 cathode at a relatively low synthesis temperature to relieve particle agglomeration. Meanwhile, the Nb doping strategy is employed to broaden the interplanar spacing to facilitate Li+ diffusion, inhibit the Li+/Ni2+ cation mixing, and restrain the severe phase transformation. The obtained Nb-doped single-crystalline LiNi0.95Co0.025Mn0.025O2 (SC-NCM-N) cathode achieves a high reversible capacity of 216.4 mAh g-1 at 0.1 C (1 C = 180 mAh g-1), along with an improved capacity retention (88.7% after 100 cycles at 1 C) in comparison with the polycrystalline LiNi0.95Co0.025Mn0.025O2 (P-NCM, 66.8%) and pristine single-crystalline LiNi0.95Co0.025Mn0.025O2 (SC-NCM, 79.1%). This work offers insights into developing high-nickel single-crystalline cathodes for high-energy-density LIBs.

Schlagwörter

Stichwörter der Autor:innen

lithium-ion batteriesmolten salt methodniobium dopantsingle-crystallineultrahigh-nickel layered cathode

Autor:innen und Institutionen

  • State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, Hubei 430070, China.
  • International School of Materials Science and Engineering, School of Materials Science and Microelectronics, Wuhan University of Technology, Wuhan, Hubei 430070, China.
  • College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, Zhejiang 310058, China.
  • Quzhou Institute of Power Battery and Grid Energy Storage, Quzhou, Zhejiang 324000, China.

ORCID-Profile: Xing Zhou, Jin Han, Tiefeng Liu, Ya You

Förderung

  • China Association for Science and Technology
  • National Key Research and Development Program of China
  • Fundamental Research Funds for the Central Universities
  • National Natural Science Foundation of China

Zitieren

APA

Xu, D., Zhou, X., He, D., Liu, X., Yang, C., Han, J., Liu, T., & You, Y. (2025). Niobium-Doped Ultrahigh-Ni Single-Crystalline LiNi 0.95 Co 0.025 Mn 0.025 O 2 Cathode Enabled by the Molten Salt Method for High-Energy Lithium-Ion Batteries. ACS Applied Materials & Interfaces, 17(47), 64514-64522. https://doi.org/10.1021/acsami.5c17045

Vancouver

Xu D, Zhou X, He D, Liu X, Yang C, Han J, et al. Niobium-Doped Ultrahigh-Ni Single-Crystalline LiNi 0.95 Co 0.025 Mn 0.025 O 2 Cathode Enabled by the Molten Salt Method for High-Energy Lithium-Ion Batteries. ACS Applied Materials & Interfaces. 2025;17(47):64514-64522. doi:10.1021/acsami.5c17045

BibTeX
@article{Xu2025,
  author = {Xu, Dawei and Zhou, Xing and He, Dongwei and Liu, Xiaowei and Yang, Chao and Han, Jin and Liu, Tiefeng and You, Ya},
  title = {Niobium-Doped Ultrahigh-Ni Single-Crystalline LiNi 0.95 Co 0.025 Mn 0.025 O 2 Cathode Enabled by the Molten Salt Method for High-Energy Lithium-Ion Batteries},
  journal = {ACS Applied Materials & Interfaces},
  year = {2025},
  volume = {17},
  number = {47},
  pages = {64514--64522},
  doi = {10.1021/acsami.5c17045}
}
Kostenlos starten →