EUVIMEDEUVIMED entdecken
Crossref

Ultrafine Cellular Eutectic Biodegradable Zn–Ge Alloys Fabricated by Laser Powder Bed Fusion: Process Manipulation and Performance Improvement

Chengde Gao iD, Shuaishuai Zhu, Xiong Yao, Cijun Shuai iD

ACS Applied Materials & Interfaces · 20.08.2025 · 17 (33) · 46786-46802

DOI: 10.1021/acsami.5c12077 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 11.08.2025. Verfasst von Chengde Gao und 3 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Precision Manufacturing for Extreme Service Performance, College of Mechanical and Electrical Engineering, Central South Univ…. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 70 Literaturangaben. Gefördert von: Innovation-Driven Project of Central South University, China Association for Science and Technology, Natural Science Foundation of Hunan Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Zn has been recognized as a promising biodegradable metal for its good biocompatibility and favorable biodegradability. However, it has always struggled with poor mechanical properties, which restrict its application prospects as a bone implant. In the present study, the laser powder bed fusion (LPBF) process was applied to fabricate biodegradable Zn-Ge eutectic alloys for mechanical reinforcement. The effects of volumetric energy density on the relative density and surface roughness of LPBF-fabricated (LPBF-ed) Zn-Ge alloys were investigated by orthogonal tests, which contributed to an optimal relative density >99.5%. Because of the differences in growth rates of constituent phases under nonequilibrium solidification, the LPBF-ed Zn-Ge alloys exhibited a distinctive ultrafine cellular structure (∼1.2 μm), where the α-Zn matrix was surrounded by a Zn-Ge network eutectic via semicoherent interface. Meanwhile, the size of the Zn-Ge eutectic phase was also significantly refined owing to the ultrafast cooling and high temperature gradient of the LPBF process. Moreover, the Ge-doping was found to enable heterogeneous nucleation and significantly refine the grain size within the LPBF-ed Zn-Ge alloys, especially in the Zn-3Ge alloy. Consequently, the LPBF-ed Zn-3Ge alloy presented substantially improved yield strength (156.81 ± 7.47 MPa) and ultimate tensile strength (178.61 ± 6.41 MPa) owing to the numerous semicoherent interfaces induced by refined eutectic structure. Furthermore, the LPBF-ed Zn-Ge alloys also demonstrated good cytocompatibility, as well as appropriate degradation rates (0.265 ± 0.010 mm/y for LPBF-ed Zn-3Ge alloy) owing to the microbattery effect and the barrier effect. Accordingly, these findings indicated the promising application of the LPBF-ed ultrafine cellular eutectic structure in the mechanical reinforcement of biodegradable Zn alloys.

Schlagwörter

Stichwörter der Autor:innen

Cellular eutectic structureInterface characteristicsLaser powder bed fusionMechanical propertiesZn−Ge alloys

Autor:innen und Institutionen

  • State Key Laboratory of Precision Manufacturing for Extreme Service Performance, College of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China.
  • Jiangxi Province Key Laboratory of Additive Manufacturing of Implantable Medical Device, Jiangxi University of Science and Technology, Nanchang 330013, China.

ORCID-Profile: Chengde Gao, Cijun Shuai

Förderung

  • Innovation-Driven Project of Central South University
  • China Association for Science and Technology
  • Natural Science Foundation of Hunan Province
  • National Key Research and Development Program of China
  • Science and Technology Program of Hunan Province
  • National Natural Science Foundation of China
  • Natural Science Foundation of Jiangxi Province
  • State Key Laboratory of Precision Manufacturing for Extreme Service Performance, Central South University

Zitieren

APA

Gao, C., Zhu, S., Yao, X., & Shuai, C. (2025). Ultrafine Cellular Eutectic Biodegradable Zn–Ge Alloys Fabricated by Laser Powder Bed Fusion: Process Manipulation and Performance Improvement. ACS Applied Materials & Interfaces, 17(33), 46786-46802. https://doi.org/10.1021/acsami.5c12077

Vancouver

Gao C, Zhu S, Yao X, Shuai C. Ultrafine Cellular Eutectic Biodegradable Zn–Ge Alloys Fabricated by Laser Powder Bed Fusion: Process Manipulation and Performance Improvement. ACS Applied Materials & Interfaces. 2025;17(33):46786-46802. doi:10.1021/acsami.5c12077

BibTeX
@article{Gao2025,
  author = {Gao, Chengde and Zhu, Shuaishuai and Yao, Xiong and Shuai, Cijun},
  title = {Ultrafine Cellular Eutectic Biodegradable Zn–Ge Alloys Fabricated by Laser Powder Bed Fusion: Process Manipulation and Performance Improvement},
  journal = {ACS Applied Materials & Interfaces},
  year = {2025},
  volume = {17},
  number = {33},
  pages = {46786--46802},
  doi = {10.1021/acsami.5c12077}
}
Kostenlos starten →