Understanding the Role of Microstructure in Ti 3 C 2 T x MXene Membrane Performance
ACS Applied Materials & Interfaces · 2025-07-24
DOI: 10.1021/acsami.5c10055 ↗At a glance
Journal article in ACS Applied Materials & Interfaces, published online on 2025-07-24. Written by Kiandokht Pakravan and 3 co-authors. Institution: Department of Materials Engineering, Auburn University, 275 Wilmore Laboratories, Auburn, Alabama 36849, United States. Cited 2 times so far (Crossref); 71 references. Funded by: Division of Chemical, Bioengineering, Environmental, and Transport Systems, Alabama Research and Development Enhancement Fund.
Abstract (original language)
Ti3C2Tx MXene membranes have attracted considerable interest for separation technologies owing to their well-defined and tunable interlayer channels. However, reported water permeability values vary widely, suggesting the presence of additional, unrecognized factors influencing water transport. In this study, we demonstrate that both the dynamic microstructure of MXene membranes under pressure and the flake size of Ti3C2Tx, used in fabrication play critical roles in determining water flux. We observed a substantial decline in water permeability, from tens of L/m2·bar·h to below 5 L/m2·bar·h, during filtration, attributed to compaction of the initially loose membrane structure. Notably, the change in the microstructure is reversible, with the disordered microstructure recovering after drying. Moreover, MXene flake size is found to impact the tortuosity of water pathways, where membranes constructed from smaller flakes exhibit higher permeability. For example, membranes fabricated with an average flake size of 4 μm achieved water permeabilities 2.15 times lower than those made with 0.17 μm flakes. These findings underscore the complex interplay between microstructure dynamics, flake size, and liquid transport, offering key insights for the rational design of high-performance MXene-based separation membranes.
Subjects
Author keywords
Authors and institutions
- Department of Materials Engineering, Auburn University, 275 Wilmore Laboratories, Auburn, Alabama 36849, United States.
- Department of Chemical and Biological Engineering, The University of Alabama, 251 Shelby Lane, Tuscaloosa, Alabama 35487, United States.
- Department of Aerospace and Mechanical Engineering, The University of Arizona, 1130 N Mountain Avenue, Tucson, Arizona 85721, United States.
ORCID profiles: Milad Rabbani Esfahani, Majid Beidaghi
Funding
- Division of Chemical, Bioengineering, Environmental, and Transport Systems
- Alabama Research and Development Enhancement Fund
Cite
APA
Pakravan, K., Esfahani, M. R., Prorok, B. C., & Beidaghi, M. (2025). Understanding the Role of Microstructure in Ti 3 C 2 T x MXene Membrane Performance. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.5c10055
Vancouver
Pakravan K, Esfahani MR, Prorok BC, Beidaghi M. Understanding the Role of Microstructure in Ti 3 C 2 T x MXene Membrane Performance. ACS Applied Materials & Interfaces. 2025. doi:10.1021/acsami.5c10055
BibTeX
@article{Pakravan2025,
author = {Pakravan, Kiandokht and Esfahani, Milad Rabbani and Prorok, Barton C and Beidaghi, Majid},
title = {Understanding the Role of Microstructure in Ti 3 C 2 T x MXene Membrane Performance},
journal = {ACS Applied Materials & Interfaces},
year = {2025},
doi = {10.1021/acsami.5c10055}
}
EUVIMED