Hydrophobic Silica Gels and Aerogels for Direct Air Capture: Hybrid Grafting To Suppress Water Uptake and Capillary Condensation
ACS Applied Materials & Interfaces · 2025-07-30 · 17 (30) · 42954-42968
DOI: 10.1021/acsami.5c04491 ↗At a glance
Journal article in ACS Applied Materials & Interfaces, published online on 2025-07-17. Written by Paweł P Ziemiański and 7 co-authors. Institution: Building Energy Materials and Components, Empa, 8600 Dübendorf, Switzerland. Cited 12 times so far (Crossref); 67 references. The full text is freely available (open access, CC BY 4.0). Funded by: Eidgen?ssische Technische Hochschule Z?rich.
Abstract (original language)
Direct air capture of CO2 (DAC) is critical to achieving climate goals, requiring the removal of approximately 220 000 Mt of CO2 by 2100. Amine-functionalized sorbents are promising for CO2 capture but face challenges under high humidity, where water sorption reduces the CO2 selectivity and capillary condensation may degrade the sorbent, especially the delicate silica aerogel backbone, compromising structural integrity. To address this issue, we introduce superhydrophobic silica gels functionalized by hybrid grafting of amine, long-aliphatic, and trimethylsilyl groups. These materials drastically reduce water uptake, from >50 wt % for nonhydrophobized gels to 5 wt % at 95% RH, and maintain high CO2/water selectivity at high relative humidity. This shows how to overcome a limitation of silica sorbents, which have shown poor performance up to now under realistic high-humidity DAC conditions. The hydrophobic functional groups shield the hydrophilic amine sites and prevent capillary condensation, preserving pore hydrophobicity, preventing pore clogging with water, and ensuring rapid CO2 diffusion, essential for sustained performance. We demonstrate that conventional single-component and dry-condition CO2 sorption tests overlook the critical role of moisture, underestimating the detrimental effect of presorbed water on nonhydrophobized silica gels, previously reported in the literature. The ability to apply ambient pressure drying without significant selectivity loss, along with the affordability of the silica matrix, enhances the feasibility of real-world implementation for silica-based DAC sorbents. Given the versatility of amorphous sorbents, this study paves the way for further material optimization tailored to DAC applications.
Subjects
Author keywords
Authors and institutions
- Building Energy Materials and Components, Empa, 8600 Dübendorf, Switzerland.
- Laboratory for Computational Engineering, Empa, 8600 Dübendorf, Switzerland.
- PSI Center for Energy and Environmental Sciences (CEE), 5232 Villigen PSI, Switzerland.
ORCID profiles: Paweł P Ziemiański, Ivan Lunati, Marco Ranocchiari, Wim J Malfait, Sandra Galmarini
Funding
- Eidgen?ssische Technische Hochschule Z?rich
Cite
APA
Ziemiański, P. P., Cherotich, M., Sadykov, I., Mansour, C., Lunati, I., Ranocchiari, M., Malfait, W. J., & Galmarini, S. (2025). Hydrophobic Silica Gels and Aerogels for Direct Air Capture: Hybrid Grafting To Suppress Water Uptake and Capillary Condensation. ACS Applied Materials & Interfaces, 17(30), 42954-42968. https://doi.org/10.1021/acsami.5c04491
Vancouver
Ziemiański PP, Cherotich M, Sadykov I, Mansour C, Lunati I, Ranocchiari M, et al. Hydrophobic Silica Gels and Aerogels for Direct Air Capture: Hybrid Grafting To Suppress Water Uptake and Capillary Condensation. ACS Applied Materials & Interfaces. 2025;17(30):42954-42968. doi:10.1021/acsami.5c04491
BibTeX
@article{Ziemiaski2025,
author = {Ziemiański, Paweł P and Cherotich, Mercy and Sadykov, Ilia and Mansour, Chaima and Lunati, Ivan and Ranocchiari, Marco and Malfait, Wim J and Galmarini, Sandra},
title = {Hydrophobic Silica Gels and Aerogels for Direct Air Capture: Hybrid Grafting To Suppress Water Uptake and Capillary Condensation},
journal = {ACS Applied Materials & Interfaces},
year = {2025},
volume = {17},
number = {30},
pages = {42954--42968},
doi = {10.1021/acsami.5c04491}
}
EUVIMED