EUVIMEDObjevte EUVIMED
Crossref

Aggregation Optimization of Cathode Interlayer via Incorporating Cellulose Enables High-Performance Organic Solar Cells

Long Wang iD, Tao Li, Junying Wu, Gang Song, Guiting Chen iD, Zhicai He iD, Yong Cao

ACS Applied Materials & Interfaces · 2025-05-07 · 17 (18) · 26948-26958

DOI: 10.1021/acsami.5c02839 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2025-04-22. Written by Long Wang and 6 co-authors. Institution: Institute of Polymer Optoelectronic Materials and Devices, State Key Laboratory of Luminescent Materials and Devices, South China University of Techn…. Cited 4 times so far (Crossref); 40 references. Funded by: Ministry of Science and Technology of the People's Republic of China, Basic and Applied Basic Research Foundation of Guangdong Province, Higher Education Discipline Innovation Project.

AbstraktSubjectsBibliografické údajeCiteRelated studies

Abstract (original language)

Regulating aggregation and molecular packing of small-molecule cathode interlayer (CIL) materials is a significant but imperceptible issue in the development of high-performance organic solar cells (OSCs). For the celebrity PDINN small molecule, the strong aggregation tendency of the perylene diimide molecular backbone leads to excessive crystallinity when films form, ultimately affecting the morphology and charge transport ability of the films. Herein, we address this issue by developing a hydroxyl-induced anti-aggregation strategy by introducing a suitable amount of hydroxypropyl cellulose (HPC) into the solution of PDINN, and a careful balance is achieved between the film-forming quality and the aggregation of the material. Taking two commercially available active layer systems, PM6/Y6 and D18/L8-BO, as examples, the introduction of HPC significantly increases the J SC and FF values of the devices. Therefore, power conversion efficiency risen from 17.38% to 18.25% for the PM6/Y6 system and from 18.45% to 19.73% for the D18/L8-BO system, and it was proved that the thickness tolerance of the HPC hybrid interface was improved significantly. This hydroxyl-induced anti-aggregation strategy has demonstrated efficiency in other active layer systems. This work provides a simple and effective method to solve the aggregation problem of small molecule CIL materials, which is conducive to the commercial development of OSCs.

Subjects

Author keywords

cathode interlayerhydrogen bondinterfacial engineeringorganic solar cellssurface morphology

Authors and institutions

  • Institute of Polymer Optoelectronic Materials and Devices, State Key Laboratory of Luminescent Materials and Devices, South China University of Technology, Guangzhou 510640, P. R. China.
  • Northeast Guangdong Key Laboratory of New Functional Materials, Guangdong Rare Earth Photofunctional Materials Engineering Technology Research Centre, School of Chemistry and Environment, Jiaying University, Meizhou 514…

ORCID profiles: Long Wang, Guiting Chen, Zhicai He

Funding

  • Ministry of Science and Technology of the People's Republic of China
  • Basic and Applied Basic Research Foundation of Guangdong Province
  • Higher Education Discipline Innovation Project
  • Guangdong International Science and Technology Cooperation Foundation
  • Guangzhou Applied Basic Research Plan Project

Cite

APA

Wang, L., Li, T., Wu, J., Song, G., Chen, G., He, Z., & Cao, Y. (2025). Aggregation Optimization of Cathode Interlayer via Incorporating Cellulose Enables High-Performance Organic Solar Cells. ACS Applied Materials & Interfaces, 17(18), 26948-26958. https://doi.org/10.1021/acsami.5c02839

Vancouver

Wang L, Li T, Wu J, Song G, Chen G, He Z, et al. Aggregation Optimization of Cathode Interlayer via Incorporating Cellulose Enables High-Performance Organic Solar Cells. ACS Applied Materials & Interfaces. 2025;17(18):26948-26958. doi:10.1021/acsami.5c02839

BibTeX
@article{Wang2025,
  author = {Wang, Long and Li, Tao and Wu, Junying and Song, Gang and Chen, Guiting and He, Zhicai and Cao, Yong},
  title = {Aggregation Optimization of Cathode Interlayer via Incorporating Cellulose Enables High-Performance Organic Solar Cells},
  journal = {ACS Applied Materials & Interfaces},
  year = {2025},
  volume = {17},
  number = {18},
  pages = {26948--26958},
  doi = {10.1021/acsami.5c02839}
}
Start for free →