Gradient Lamellar SiC Nanowire Networks with Dense Coating for High-Performance Reusable Thermal Protection Materials
ACS Applied Materials & Interfaces · 2025-05-07 · 17 (18) · 27136-27143
DOI: 10.1021/acsami.5c02478 ↗At a glance
Journal article in ACS Applied Materials & Interfaces, published online on 2025-04-23. Written by Junshuai Jia and 7 co-authors. Institution: State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University, Xi'an 710049, China. Cited 9 times so far (Crossref); 42 references. Funded by: China Postdoctoral Science Foundation, National Natural Science Foundation of China, Characteristic Development Guidance Funds for the Central Universities.
Abstract (original language)
As space exploration advances, reusable thermal protection materials are essential for spacecraft that must withstand extreme aerodynamic heating during reentry. SiC nanowire aerogels offer a combination of ultralow density, excellent thermal insulation, and inherent oxidation resistance, but their application is limited by insufficient thermal stability above 1200 °C in oxygen-rich environments. In this study, a layered SiC nanowire network was fabricated by hot-pressing to enhance nanowire cross-linking and reduce pore size. A dense SiC coating was subsequently introduced via chemical vapor infiltration (CVI), forming a gradient structure with nanowire diameters decreasing from surface to core. This design yields a low density of 640 mg·cm-3, high compressive strength of 10.1 MPa, and exceptional ablation resistance. During 60 s of oxyacetylene torch ablation at 1800 °C, the material exhibited a negative mass ablation rate of -0.02 mg·s-1 and a negative linear ablation rate of -1.05 μm·s-1. These results demonstrate a promising structural strategy for enhancing the mechanical and thermal robustness of ceramic aerogels, advancing their application in extremely high-temperature environments.
Subjects
Author keywords
Authors and institutions
- State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University, Xi'an 710049, China.
- School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an 710049, China.
ORCID profiles: De Lu, Shuhai Jia, Lei Su, Kang Peng, Hongjie Wang
Funding
- China Postdoctoral Science Foundation
- National Natural Science Foundation of China
- Characteristic Development Guidance Funds for the Central Universities
Cite
APA
Jia, J., Lu, Jia, S., Ni, Z., Su, L., Niu, M., Peng, K., & Wang, H. (2025). Gradient Lamellar SiC Nanowire Networks with Dense Coating for High-Performance Reusable Thermal Protection Materials. ACS Applied Materials & Interfaces, 17(18), 27136-27143. https://doi.org/10.1021/acsami.5c02478
Vancouver
Jia J, Lu, Jia S, Ni Z, Su L, Niu M, et al. Gradient Lamellar SiC Nanowire Networks with Dense Coating for High-Performance Reusable Thermal Protection Materials. ACS Applied Materials & Interfaces. 2025;17(18):27136-27143. doi:10.1021/acsami.5c02478
BibTeX
@article{Jia2025,
author = {Jia, Junshuai and Lu, De and Jia, Shuhai and Ni, Zhentao and Su, Lei and Niu, Min and Peng, Kang and Wang, Hongjie},
title = {Gradient Lamellar SiC Nanowire Networks with Dense Coating for High-Performance Reusable Thermal Protection Materials},
journal = {ACS Applied Materials & Interfaces},
year = {2025},
volume = {17},
number = {18},
pages = {27136--27143},
doi = {10.1021/acsami.5c02478}
}
EUVIMED