Hybrid Metasurface for On-Chip Enrichment and Quantification of Biological Samples
ACS Applied Materials & Interfaces · 2025-04-16 · 17 (15) · 22464-22473
DOI: 10.1021/acsami.5c02409 ↗At a glance
Journal article in ACS Applied Materials & Interfaces, published online on 2025-04-02. Written by Qinming Zhang and 7 co-authors. Institution: Department of Electrical and Computer Engineering, Iowa State University, Ames, Iowa 50011, United States. Major MEDLINE topics: Biosensing Techniques, Lab-On-A-Chip Devices, Influenza A virus. Cited 9 times so far (Crossref); 60 references. The full text is freely available (open access, CC BY-NC-ND 4.0). Funded by: Division of Electrical, Communications and Cyber Systems, Iowa State University.
Abstract (original language)
This work reports a 3D-printed metasurface as a biosensing device that combines the functions of sample enrichment and quantification. The device consists of a nanoplasmonic sensing element surrounded by a biomimetic hydrophobic structure. The hydrophobic structure serves as a sample concentrator that can enrich analyte, which is subsequently quantified by the nanoplasmonic biosensor. Both the nanoscale biosensor and microscale hydrophobic sample concentrator were fabricated using two-photon polymerization lithography (TPL). The hydrophobic microstructure was inspired by natural patterns found on surfaces like lotus leaves, which are known for their water-repellent properties. The TPL-based 3D printing approach enables the integration of two functions into one chip with a high-resolution and simple fabrication process. The device was employed to detect swine influenza A virus within a droplet initially containing 20 μL of liquid. During testing, the droplet's volume decreased due to evaporation driven by plasmonic heating. As a result, the droplet's diameter can shrink from 3.4 mm to 0.1 mm in 15 min. The volume reduction corresponds to a virus concentration increase of over 4 × 104 times. Integrating superhydrophobic sample concentration with the nanoplasmonic biosensor significantly improves analyte immobilization dynamics, enhances sensitivity, and reduces assay time.
Subjects
MeSH terms (MEDLINE)
Author keywords
Authors and institutions
- Department of Electrical and Computer Engineering, Iowa State University, Ames, Iowa 50011, United States.
- Veterinary Diagnostic & Production Animal Medicine, Iowa State University, Ames, Iowa 50011, United States.
- Microelectronics Research Centre, Iowa State University, Ames, Iowa 50011, United States.
- Department of Mechanical Engineering, Iowa State University, Ames, Iowa 50011, United States.
ORCID profiles: Liang Dong, Meng Lu
Funding
- Division of Electrical, Communications and Cyber Systems
- Iowa State University
Cite
APA
Zhang, Q., Rawal, G., Qian, J., Zou, S., Gillingham, J., Zhang, J., Dong, L., & Lu, M. (2025). Hybrid Metasurface for On-Chip Enrichment and Quantification of Biological Samples. ACS Applied Materials & Interfaces, 17(15), 22464-22473. https://doi.org/10.1021/acsami.5c02409
Vancouver
Zhang Q, Rawal G, Qian J, Zou S, Gillingham J, Zhang J, et al. Hybrid Metasurface for On-Chip Enrichment and Quantification of Biological Samples. ACS Applied Materials & Interfaces. 2025;17(15):22464-22473. doi:10.1021/acsami.5c02409
BibTeX
@article{Zhang2025,
author = {Zhang, Qinming and Rawal, Gaurav and Qian, Jingjing and Zou, Shengpu and Gillingham, Jesse and Zhang, Jianqiang and Dong, Liang and Lu, Meng},
title = {Hybrid Metasurface for On-Chip Enrichment and Quantification of Biological Samples},
journal = {ACS Applied Materials & Interfaces},
year = {2025},
volume = {17},
number = {15},
pages = {22464--22473},
doi = {10.1021/acsami.5c02409}
}
EUVIMED