EUVIMEDOpdag EUVIMED
Crossref

Optimizing PEDOT:PSS with a Sodium Lignosulfonate Additive to Improve the Performance of Inverted Perovskite Solar Cells

Yuncheng Deng, Ying Li, Enze Quan, Wan Cheng, Banghui Chen, Lijia Chen iD, Qiaoming Zhang iD

ACS Applied Materials & Interfaces · 2025-04-09 · 17 (14) · 21536-21543

DOI: 10.1021/acsami.5c00539 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2025-03-28. Written by Yuncheng Deng and 6 co-authors. Institution: College of Physics and Electronic Engineering, Chongqing Normal University, Chongqing 401331, China. Cited 12 times so far (Crossref); 34 references. Funded by: Chongqing Municipal Education Commission, Natural Science Foundation of Chongqing.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is considered to be a highly desirable hole transport material for inverted perovskite solar cells (PSCs) because of its low cost, simple preparation process, and high light transmittance. Unfortunately, its inherent drawbacks, such as suboptimal electrical conductivity and high interfacial defect density, hamper charge extraction efficiency and ultimately limit device performance. In this work, we incorporated an environmentally friendly additive, sodium lignosulfonate (LS), into PEDOT:PSS to enhance the photovoltaic performance of inverted PSCs. The optimized device with a 0.1 mg/mL LS-doped hole transport layer (HTL) displayed a significant increase in power conversion efficiency from 15.36% of the reference device (with pristine PEDOT:PSS HTL) to 17.28%. LS doping did not influence the morphology of the PEDOT:PSS film and the overlying perovskite film. Instead, it serves a dual function: improving conductivity to enhance hole extraction ability and reducing interface defects to decrease nonradiative recombination losses. Therefore, this work presents a straightforward and efficient additive engineering strategy to enhance the electrical performance of inverted PSCs.

Subjects

Author keywords

PEDOT:PSSadditive dopinghole transport layerinverted perovskite solar cellssodium lignosulfonate

Authors and institutions

  • College of Physics and Electronic Engineering, Chongqing Normal University, Chongqing 401331, China.
  • School of Physical Science and Technology, Southwest University, Chongqing 400715, China.

ORCID profiles: Lijia Chen, Qiaoming Zhang

Funding

  • Chongqing Municipal Education Commission
  • Natural Science Foundation of Chongqing

Cite

APA

Deng, Y., Li, Y., Quan, E., Cheng, W., Chen, B., Chen, L., & Zhang, Q. (2025). Optimizing PEDOT:PSS with a Sodium Lignosulfonate Additive to Improve the Performance of Inverted Perovskite Solar Cells. ACS Applied Materials & Interfaces, 17(14), 21536-21543. https://doi.org/10.1021/acsami.5c00539

Vancouver

Deng Y, Li Y, Quan E, Cheng W, Chen B, Chen L, et al. Optimizing PEDOT:PSS with a Sodium Lignosulfonate Additive to Improve the Performance of Inverted Perovskite Solar Cells. ACS Applied Materials & Interfaces. 2025;17(14):21536-21543. doi:10.1021/acsami.5c00539

BibTeX
@article{Deng2025,
  author = {Deng, Yuncheng and Li, Ying and Quan, Enze and Cheng, Wan and Chen, Banghui and Chen, Lijia and Zhang, Qiaoming},
  title = {Optimizing PEDOT:PSS with a Sodium Lignosulfonate Additive to Improve the Performance of Inverted Perovskite Solar Cells},
  journal = {ACS Applied Materials & Interfaces},
  year = {2025},
  volume = {17},
  number = {14},
  pages = {21536--21543},
  doi = {10.1021/acsami.5c00539}
}
Start for free →