EUVIMEDEUVIMED entdecken
Crossref

Optimizing PEDOT:PSS with a Sodium Lignosulfonate Additive to Improve the Performance of Inverted Perovskite Solar Cells

Yuncheng Deng, Ying Li, Enze Quan, Wan Cheng, Banghui Chen, Lijia Chen iD, Qiaoming Zhang iD

ACS Applied Materials & Interfaces · 09.04.2025 · 17 (14) · 21536-21543

DOI: 10.1021/acsami.5c00539 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 28.03.2025. Verfasst von Yuncheng Deng und 6 weiteren Autor:innen. Beteiligte Einrichtung: College of Physics and Electronic Engineering, Chongqing Normal University, Chongqing 401331, China. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 34 Literaturangaben. Gefördert von: Chongqing Municipal Education Commission, Natural Science Foundation of Chongqing.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is considered to be a highly desirable hole transport material for inverted perovskite solar cells (PSCs) because of its low cost, simple preparation process, and high light transmittance. Unfortunately, its inherent drawbacks, such as suboptimal electrical conductivity and high interfacial defect density, hamper charge extraction efficiency and ultimately limit device performance. In this work, we incorporated an environmentally friendly additive, sodium lignosulfonate (LS), into PEDOT:PSS to enhance the photovoltaic performance of inverted PSCs. The optimized device with a 0.1 mg/mL LS-doped hole transport layer (HTL) displayed a significant increase in power conversion efficiency from 15.36% of the reference device (with pristine PEDOT:PSS HTL) to 17.28%. LS doping did not influence the morphology of the PEDOT:PSS film and the overlying perovskite film. Instead, it serves a dual function: improving conductivity to enhance hole extraction ability and reducing interface defects to decrease nonradiative recombination losses. Therefore, this work presents a straightforward and efficient additive engineering strategy to enhance the electrical performance of inverted PSCs.

Schlagwörter

Stichwörter der Autor:innen

PEDOT:PSSadditive dopinghole transport layerinverted perovskite solar cellssodium lignosulfonate

Autor:innen und Institutionen

  • College of Physics and Electronic Engineering, Chongqing Normal University, Chongqing 401331, China.
  • School of Physical Science and Technology, Southwest University, Chongqing 400715, China.

ORCID-Profile: Lijia Chen, Qiaoming Zhang

Förderung

  • Chongqing Municipal Education Commission
  • Natural Science Foundation of Chongqing

Zitieren

APA

Deng, Y., Li, Y., Quan, E., Cheng, W., Chen, B., Chen, L., & Zhang, Q. (2025). Optimizing PEDOT:PSS with a Sodium Lignosulfonate Additive to Improve the Performance of Inverted Perovskite Solar Cells. ACS Applied Materials & Interfaces, 17(14), 21536-21543. https://doi.org/10.1021/acsami.5c00539

Vancouver

Deng Y, Li Y, Quan E, Cheng W, Chen B, Chen L, et al. Optimizing PEDOT:PSS with a Sodium Lignosulfonate Additive to Improve the Performance of Inverted Perovskite Solar Cells. ACS Applied Materials & Interfaces. 2025;17(14):21536-21543. doi:10.1021/acsami.5c00539

BibTeX
@article{Deng2025,
  author = {Deng, Yuncheng and Li, Ying and Quan, Enze and Cheng, Wan and Chen, Banghui and Chen, Lijia and Zhang, Qiaoming},
  title = {Optimizing PEDOT:PSS with a Sodium Lignosulfonate Additive to Improve the Performance of Inverted Perovskite Solar Cells},
  journal = {ACS Applied Materials & Interfaces},
  year = {2025},
  volume = {17},
  number = {14},
  pages = {21536--21543},
  doi = {10.1021/acsami.5c00539}
}
Kostenlos starten →