Oxygen Vacancies Can Drive Surface Transformation of High-Entropy Perovskite Oxide for the Oxygen Evolution Reaction as Probed with Scanning Probe Microscopy
ACS Applied Materials & Interfaces · 2025-04-16 · 17 (15) · 23237-23248
DOI: 10.1021/acsami.4c22352 ↗At a glance
Journal article in ACS Applied Materials & Interfaces, published online on 2025-04-03. Written by Michael Verhage and 3 co-authors. Institution: Molecular Materials and Nanosystems (M2N), Department of Applied Physics and Science Education, Eindhoven University of Technology, Eindhoven 5600 MB…. Cited 32 times so far (Crossref); 63 references. The full text is freely available (open access, CC BY 4.0). Funded by: Nederlandse Organisatie voor Wetenschappelijk Onderzoek.
Abstract (original language)
Epitaxial transition-metal oxide perovskite catalysts form a highly active catalyst class for the oxygen evolution reaction (OER). Understanding the origin of chemical dissolution and surface transformations during the OER is important to rationally design effective catalyst. These changes arise from complex interactions involving dynamic restructuring and electronic/structural adaptations. Although initial instability is common, surfaces can reach equilibrium through chemical transformations. High entropy perovskite oxides (HEPOs), which incorporate multiple 3d metal cations in near-equimolar ratios, have emerged as promising catalysts due to their enhanced OER activity compared to single-cation variants, attributed to their high configurational entropy and compositional flexibility. To advance HEPO catalyst applications, understanding the mechanisms governing their surface (in)stability is important. In this work, we examine surface degradation in epitaxial La(Cr,Mn,Fe,Co,Ni)O3-δ thin films before and after OER using complementary scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS). STM reveals tip-induced degradation of as-grown films under positive bias, attributed to oxygen anion removal and charge trapping-induced lattice degradation, demonstrating its utility as a probe for surface stability dynamics. Post-OER XPS analysis shows irreversible surface transformations from the initial epitaxial phase, characterized by 3d-metal leaching and formation of La and d-metal (oxy)hydroxides. Our findings indicate that oxygen vacancies and lattice strain trigger structural breakdown in these multi-cation perovskite surfaces during the OER, leading to surface restructuring and diminished catalytic performance compared to the as-grown epitaxial HEPO phase. This work identifies oxygen leaching as the likely primary driver of surface transformation during the OER. We show that STM offers an important tool to probe the transformation even before operando conditions, which can find use in similar material studies.
Subjects
Author keywords
Authors and institutions
- Molecular Materials and Nanosystems (M2N), Department of Applied Physics and Science Education, Eindhoven University of Technology, Eindhoven 5600 MB, the Netherlands.
ORCID profiles: Michael Verhage, Stijn J H M van den Broek
Funding
- Nederlandse Organisatie voor Wetenschappelijk Onderzoek
Cite
APA
Verhage, M., Broek, S. J. H. M. V. D., Weijtens, C., & Flipse, C. F. J. (2025). Oxygen Vacancies Can Drive Surface Transformation of High-Entropy Perovskite Oxide for the Oxygen Evolution Reaction as Probed with Scanning Probe Microscopy. ACS Applied Materials & Interfaces, 17(15), 23237-23248. https://doi.org/10.1021/acsami.4c22352
Vancouver
Verhage M, Broek SJHMVD, Weijtens C, Flipse CFJ. Oxygen Vacancies Can Drive Surface Transformation of High-Entropy Perovskite Oxide for the Oxygen Evolution Reaction as Probed with Scanning Probe Microscopy. ACS Applied Materials & Interfaces. 2025;17(15):23237-23248. doi:10.1021/acsami.4c22352
BibTeX
@article{Verhage2025,
author = {Verhage, Michael and Broek, Stijn J H M van den and Weijtens, Christ and Flipse, Cornelis F J},
title = {Oxygen Vacancies Can Drive Surface Transformation of High-Entropy Perovskite Oxide for the Oxygen Evolution Reaction as Probed with Scanning Probe Microscopy},
journal = {ACS Applied Materials & Interfaces},
year = {2025},
volume = {17},
number = {15},
pages = {23237--23248},
doi = {10.1021/acsami.4c22352}
}
EUVIMED